Home Network Community > Deco > Deco Beta firmware release date
< Deco

Deco Beta firmware release date

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Deco Beta firmware release date

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco Beta firmware release date
Deco Beta firmware release date
2022-10-07 22:03:57 - last edited 2022-10-08 06:16:46
Tags: #Feature Request #Firmware Update #1.1.0
Model: Deco X50  
Hardware Version: V1
Firmware Version:

Hi,

 

Can you please share the expectation for the release date of the beta firmware 1.1.0 or 1.6.0 and what devices are expected to receive it?

 

  2      
 
  2      
 
#1
Options
11 Reply
Re:Deco Beta firmware release date
2022-10-08 06:22:45 - last edited 2022-10-11 07:09:35

Hi All and @JoaoRamos 

Good news!  The beta firmware 1.1.0 for Deco X50 V1 is ready which has added similar features as  1.6.0 versions on Deco M5/M9 plus(1.1.0 version on Deco X55/M4-v4).

Please find the download link below:


Deco X50- V1-1.1.0
 

Note: Be sure you have read Terms and Conditions for TP-Link Beta Firmware before proceeding!

 

More details about New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco Signal Source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients Connection Preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS.
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP.
6. Added a prompt notification when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.

 

Notes:
1. The beta firmware could only be downgraded back to the previous official version via firmware recovery.
2. Please update your Deco APP to the latest version for the new features.
3. If there are non-1.6.0/1.1.0 models in the Mesh network, you may miss some new features but this feature will be supported via firmware update in the future.
4. You may miss some new features when Deco is set to Access Point mode.

 

As usual, the 1.6.0/1.1.0 firmware version is a leap forward and any feedback after the firmware upgrade will be highly valued. If you have any confusion about the firmware upgrade, please feel free to comment below.

 

Related Articles:
Deco M5 1.6.1
Deco M9 Plus 1.6.0
Deco M4(V4) 1.1.0

Deco X55(V1) 1.1.0
Frequently Asked Questions on Deco Firmware Update

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco Beta firmware release date
2022-10-08 09:47:52

  @David-TP 

It would be good for the community to know what the devices are expected do receive the beta update.

On my case I have a deco x50 mesh kit that is basically a deco x55 but with the top on white, can you share if it is expected that the x50 will receive this beta firmware and the ETA to recieve it?

 

  0  
  0  
#3
Options
Re:Deco Beta firmware release date
2022-10-12 10:20:44

  @David-TP 

 

Hello there, We are waiting for a new version firmware in deco x60 and deco x73dsl, I hope it will be given as soon as possible, we will get rid of some of our problems as soon as possible.

  2  
  2  
#4
Options
Re:Deco Beta firmware release date
2022-10-24 07:14:22

I would like to know about the X20 firmware update? the 2.4 GHz is broken.

I am aware of the guest network workaround, but this unit (under a month old for me) is not working as advertised.

Also will customising the satellite Deco signal source be included?

Thank You 

  1  
  1  
#5
Options
Re:Deco Beta firmware release date
2022-10-26 03:21:09

  @Treb61 

Hi, it is planned to release the same firmware for Deco X20 as well. Can I have more details about what you meant by "the 2.4 GHz is broken"?

And so far, were you having any issues when the satellite Deco is not connecting to the nearest Deco, not to the main Deco?

Thank you very much.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#6
Options
Re:Deco Beta firmware release date
2022-10-26 03:52:53

  @David-TP 

Thanks for getting back David.

I was having problems connecting any 2.4GHz device, although I was able to connect my solar inverter (2.4 GHz only) using the Guest Network method.

Other items, such as printer, ring doorbell chime, and daughter TV didn't connect. ( Ring Chime is now bricked)

Also, some items would connect to the furtherest node instead of the closest and there wasn't a way to configue this.

I am reasonably technical minded and wasted a lot of time on what should have been a simple setup process.

I today returned the x20 and received a full refund.

My system was back up and running within minutes with the only slight problem being a weaker WiFi signal at the extremities of my house.

Being an electrician I have already run a cat6 cable to the problem areas, I should have done this instead of wasting my time on a product that seemed to me to stil be in beta test mode.

Regards,

Treb.

  2  
  2  
#7
Options
Re:Deco Beta firmware release date
2022-10-28 07:02:34 - last edited 2022-11-03 07:23:40

Pls roll out X20 v4 beta firmware .    I have main  X50 v1 with new beta 1.1.0 , but i can't use and test new feature 

i have one problem

x50-x20 non agressive roaming.  Only then re connect manually.    1.0.8  i have no problem

  2  
  2  
#8
Options
Re:Deco Beta firmware release date
2023-01-27 05:53:55 - last edited 2023-01-27 05:54:16

  
And for the x20 v2!

  0  
  0  
#9
Options
Re:Deco Beta firmware release date
2023-01-27 08:03:27

  @Lexivienna 

 

A major feature of the firmware is the ability to select a preferred signal source on the DECO app. According to a DECO application note, last updated 20 Oct. 2022, this feature will be implemented on the following models:

Deco W3600 , Deco X20 , Deco X50-DSL , Deco M1300 , Deco X68 , Deco HC4 , Deco X25 , Deco Voice X50 , Deco E4R , Deco X58-4G , Deco E4S , Deco X5700 , Deco X4300 Pro , Deco W6000 , Deco XE5300 , Deco M5 , Deco M4 , Deco X3600 , Deco HX20 , Deco XE75 , Deco M3 , Deco X75 , Deco X50-4G , Deco BE85 , Deco X50-PoE , Deco X50-Outdoor , Deco Voice X20 , Deco X73-DSL , Deco W7200 , Deco X50-5G , Deco X5400 Pro , Deco P9 , Deco X80 , Deco P7 , Deco X20-DSL , Deco 5G , Deco M5 Plus , Deco X20-4G , Deco PX50 , Deco BE95 , Deco S7 , Deco X76 Plus , Deco S4 , Deco X90 , Deco W2400 , Deco X95 , Deco X50 , Deco X96 , Deco X55 , Deco E4 , Deco E3 , Deco BE65 , Deco XE75 Pro , Deco XE200 , Deco X80-5G , Deco X55 Plus , Deco M9 Plus , Deco AC1200 , Deco M3W , Deco X60

It should be coming real soon now, but that tune has been playing for years in some cases. TP-Link obviously prioritize fancy design, marketing and developing a bewildering number of new products rather than living up to the promises of the products they have already brought to market.

  1  
  1  
#10
Options
Re:Deco Beta firmware release date
2023-01-27 13:32:56

  @DCdane https://www.tp-link.com/en/support/download/deco-x20/      only for old V1  , V4 no firmware 1.1

  0  
  0  
#11
Options
12

Information

Helpful: 2

Views: 7039

Replies: 11

Tags

Feature Request Firmware Update
1.1.0
Related Articles
 Deco X50-Outdoor Release Date
2485 10
Deco X90 UK Release Date
2015 0
Deco S4 EU V2 1.6.0 Beta Firmware Request
1243 6
 Official firmware release date
1243 1
 New Firmware release date
408 0
 Deco XE75 Aus release date?
563 2
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.