Solution How to open a range of ports on Archer C80
This Article Applies to:
Archer C80_V1
Archer C64_V1
Archer A8_V1
Background:
There are cases that customers want to allow some connections into the network, thus they want to open a range of ports on the Archer C80/C64 for the local resources. However, the Archer C80/C64 only allows opening a specific port at a time, so we here open a thread to provide a temporary solution for this. If any of you want to open a range of ports on the Archer C80/C64, please read on.
Available Solutions:
The latest official firmware for Archer C64/C80 V1.0 has already included this optimization to allow you to open a range of ports, please check for the updates on your router web GUI or Tether APP to upgrade and install the latest firmware to enjoy it, you may also download the latest firmware from the website:
Archer C64_V1_1.11.0 Build 220425 and newer versions
Archer C80_V1_1.11.30 Build 220624 and newer versions
Archer A8_V1_1.11.30 Build 220624 and newer versions
Related Articles:
Port forwarding: how to set up virtual server on TP-Link wireless router?
Why port forwarding feature is not working on my router?
-------------------------------------------------
Have other off-topic issues to report?
Welcome to > Start a New Thread < and elaborate on the issue for assistance.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I reset the C80 to factory defaults and tried to reconfigure it but it didn't work.
Luckily, today he appeared to download a new firmware update that contains the solution.
The latest official firmware version that fixes "open a range of ports" issue is 1.11.30 Build 220624 Rel.50807n(5553)
Thank you very much!
- Copy Link
- Report Inappropriate Content
GustavoQ wrote
I reset the C80 to factory defaults and tried to reconfigure it but it didn't work.
Luckily, today he appeared to download a new firmware update that contains the solution.
The latest official firmware version that fixes "open a range of ports" issue is 1.11.30 Build 220624 Rel.50807n(5553)
Thank you very much!
@GustavoQ Thank you so much for the update. I believe that is the latest official version for Archer C80, I will update that into my original post.
- Copy Link
- Report Inappropriate Content
Kevin_Z wrote
terziyski wrote
Hi Kevin,
can you confirm if a OneMesh ON/OFF switch button was implemented in the newly released FW for Archer C64 (v1.11.0 ) ?
Is the port range forwarding feature included as well (previously introduced in the beta FW) ?
@terziyski Thank you so much for reminding me of the new official release for Archer C64.
As far as I can confirm, the new official firmware has supported setting a port range when doing Port Forwarding, while it doesn't add the Onemesh ON/OFF option yet.
I will update my post for this update to remind others who care about this issue now. Thank you again.
Hi Kevin,
A new FW release is available for Archer C64 as well - Archer C64(EU)_V1_1.11.30 Build 220624
Can you confirm if this release has the OneMesh ON/OFF button ?
- Copy Link
- Report Inappropriate Content
terziyski wrote
Hi Kevin,
A new FW release is available for Archer C64 as well - Archer C64(EU)_V1_1.11.30 Build 220624
Can you confirm if this release has the OneMesh ON/OFF button ?
@terziyski Thank you very much again for bringing this up. We just confirmed that Archer C80(US)_V1_1.11.30 Build 220624 has already added the Onemesh ON/OFF switch, which has been confirmed also by @alex_m_, thanks a lot. So this Archer C64(EU)_V1_1.11.30 Build 220624 should also add the Onemesh ON/OFF now.
- Copy Link
- Report Inappropriate Content
I am on the latest release as mentioned below.
Firmware Version:
1.11.0 Build 220425 Rel.43193n(4555)
Hardware Version:
Archer C80 1.0
I still do not have a port range forward option. This is really important when the required port is not fixed all the time. Really need a solution for this issue.
Here are a few Screenshots which may help.
Also note a factory reset would not be an option.
I do not have any new update as mentioned here 1.11.30 Build 220624 Rel.50807n(5553)
Also the available update on the website is the one that I am currently on.
It looks like my device is on EU region and for the US region there is an update and the last build is indeed 1.11.30 Build 220624 Rel.50807n(5553) would it be safe for me to manually update to this firmware version?
- Copy Link
- Report Inappropriate Content
Thank you for posting and requesting a solution for opening a port range on the Archer C80.
I have updated my original post with beta firmware for Archer C80(EU) 1.0, please download and install it on your device, then confirm if you can open a port range.
- Copy Link
- Report Inappropriate Content
I set up my C80 1.0 (EU) yesterday, upgraded the firmware and am now facing the same problem of not being able to leave the internal port blank for a range of ports.
I have downloaded the beta firmware in your original post, but there is an error that prevents it from being installed.
Is there a newer beta firmware which fixes this?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I received a mail from tp link support with a link to firmware A8v1-up-noboot_2022-08-08_18.13.00.
After triple checking that it wasn't a phishing mail, I upgraded my router and now the port forwarding works correctly, thanks!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 6840
Replies: 21
Voters 2
