TP-Link Onemesh Survey
We notice that there are customers paying high attention to the Onemesh feature of the AX routers, and they may have already waited for long for the Onemesh firmware.
Here is the Onemesh compatibility list. Archer AX90/AX73/AX6000/AX21/AX20 have already supported the Onemesh, AX11000 new firmware is on the way.
Please take some time to finish the below survey, and let the dev team know more about your requirements about Onemesh:
https://surveys.hotjar.com/d0fe54ca-b28b-4d0f-a815-8643ec755e64
To know more about Onemesh, refer to these articles:
https://www.tp-link.com/onemesh/
Several questions about the OneMesh and Mesh
Thanks for your time!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi all, the developer does provide a beta version for the Onemesh firmware for the AX11000, you can install it on yours if you want to build up an Onemesh network with an existing Onemesh range extender. Get the download link from the below thread:
https://community.tp-link.com/en/home/forum/topic/261318
The official version will be available soon, you can wait for the official version if you don't want to use the beta firmware.
Thanks a lot.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Are you kidding us? After all this time waiting for OneMesh for the AX11000, you ask us to do a survey, why?
Is it because that there is no new firmware with the OneMesh feature and you're trying to pull a fast one?
After all the delays, insults, ignoring our collective pleas for information or even a simple reply, you now ask us to do a survey. Why is that?
Because TP-Link has scuttled plans for OneMesh for the AX11000 and you wish to see if we can get by without it?
Something stinks with this whole entire affair.
- Copy Link
- Report Inappropriate Content
I did your bloody survey, I don't use OneMesh on the AX11000 since it's not available. Promises have been made about it becoming available for over a year now. But every single reply from TP-Link, when they do decide to reply, says its coming shortly. BS!
- Copy Link
- Report Inappropriate Content
Kevin.
I read your original post: "let the dev team know more about your requirements about Onemesh". I go to the poll page.
And I don't see where I can express my requirements and wishes there!
There is only a survey - how many square meters I have in the apartment and how many rooms!
There is a question - "am I using OneMesh"?
Not! I cannot use it because two routers cannot be meshed!
That is, there is not a single really useful question for users. And users cannot express their "requirements about Onemesh"!
What does such a survey give?
And everything is much worse than the lack of mesh support in ax11000.
OneMesh in AX20 / AX73 (I have no other routers) is no good, because you can't combine two routers into a mesh!
Not even WDS support! An older router cannot be connected to the AX-series in WDS mode!
- Copy Link
- Report Inappropriate Content
@Kevin_Z Do you need a Onemesh? Of course! In a modern, powerful, expensive device. Yes! Be sure to have this functionality!
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Yes, the AX90 can build up an Onemesh network with the dual-band onemesh powerline, you can still use the 2nd 5ghz band by connecting the devices to it.
AX90 doesn't support WDS function.
- Copy Link
- Report Inappropriate Content
seriously? More than a year waiting anf you send a survey that does not reflect your request?
at least try man
- Copy Link
- Report Inappropriate Content
This is absolutely bloody unacceptable. Where is the Onemesh Firmware for the AX11000?
It's been a year of deception, non-answers and BS.
So, once again, where is the bloody OneMesh firmware for the flagship AX11000 that cost us a i
kings ransom?
- Copy Link
- Report Inappropriate Content
I've tried to hold out for the AX11000 OneMesh firmware but I can't wait any longer. I'm going to have to ditch this router and go with another mesh system.
It's pretty disappointing that this is a flagship router and OneMesh has yet to be supported.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 7057
Replies: 27
Voters 0
No one has voted for it yet.