Home Network Community > Deco > Optimise Deco placement
< Deco

Optimise Deco placement

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Optimise Deco placement

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Optimise Deco placement
Optimise Deco placement
2019-07-26 13:38:21 - last edited 2020-08-21 11:52:48
Model: Deco M9 Plus  
Hardware Version: V19
Firmware Version: 1.2.8

I have just bought Deco M9 with 2 units. My house is over 2 floors and internet/phone comes into house on ground floor in a corner of the house. How do I find out the optimal position for the second M9 unit to get maximum Wifi coverage. Also house is approx 3000 sq ft. Thanks. 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Re:Re:Re:Re:Re:Re:Re:Re:Optimise Deco placement -Solution
2020-08-21 11:52:20 - last edited 2020-08-21 11:52:48

@Andrewhltsang 

 

Hello,

 

Ensure you are running the latest firmware on your Deco M9 Plus first. If your firmware is not the latest and the Deco M9 hardware version is V2, update it as below:

1. Download the second firmware on the official website, which is marked as Deco M9 Plus(EU)_V2_200324 or Deco M9 Plus(US) _V2_200324:
https://www.tp-link.com/support/download/deco-m9-plus/#Firmware

2. This new firmware can ONLY be updated via the Upgrade Tool, you cannot update it via web nor on the Deco app. Upgrade Tool can be downloaded from the below link:
https://www.tp-link.com/support/download/deco-m9-plus/#Utility

3. If you cannot log into the Upgrade Tool with your TP-Link ID and password, please try to forget your password on your Deco app and login again to confirm it is correct, do remember that both the ID and password are case-sensitive:
What if I forget the password of my TP-Link ID?
Note: If you still fail to update or login, please reply with some details, such as what is the computer operating system, what is the error message, it is suggested to try different computers.

 

Good day.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#12
Options
15 Reply
Re:Optimise Deco placement
2019-07-28 09:46:20

@PhilWin 

 

You can use the wifi analyzer to scan the signal strength from the main Deco and choose a good location for the slave one. 

 

Or you can use the signal strength icon between the 2 Decos on the Deco app to give it a go. 

Note： Once you relocate the slave Deco, you can click it on the Deco app and check the signal source.

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Re:Optimise Deco placement
2019-08-17 08:57:23

Thanks for your help, much appreciated. 

Kevin_Z wrote

@PhilWin 

 

You can use the wifi analyzer to scan the signal strength from the main Deco and choose a good location for the slave one. 

 

Or you can use the signal strength icon between the 2 Decos on the Deco app to give it a go. 

Note： Once you relocate the slave Deco, you can click it on the Deco app and check the signal source.

 

 

 

  0  
  0  
#3
Options
Re:Re:Re:Optimise Deco placement
2019-08-20 08:43:38

You are very welcome.

 

Any further problem, do not hesitate to conact us. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:Re:Re:Re:Optimise Deco placement
2019-08-22 07:47:54

I can't find the following option in the app?

 

"signal strength icon between the 2 Decos"

 

I am using on iPhone - firmware v1.3.1

 

Thanks

 

Simon.

  0  
  0  
#5
Options
Re:Re:Re:Re:Re:Optimise Deco placement
2019-08-23 01:20:47

@knappers 

Please refer to the picture below:

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options
Re:Re:Re:Re:Re:Re:Optimise Deco placement
2019-08-23 06:55:48

Hi, which options did you choose to get the screen shown? Thanks

  0  
  0  
#7
Options
Re:Re:Re:Re:Re:Re:Re:Optimise Deco placement
2019-08-23 07:27:17

Please find the pic attached. 

 

You can upload the picture once you click it. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  2  
  2  
#8
Options
Re:Re:Re:Re:Re:Re:Re:Re:Optimise Deco placement
2019-08-24 07:21:23

Hi, sorry what I meant was how did you get to the screen shown in #6 above. If I click on the internet icon and then click on a room I can get something similar but it doesn’t have the level of detail in your screen shot, see below. Also is the wifi analyzer that you mentioned part of the deco app and if so, how can it be accessed? thx

 

  0  
  0  
#9
Options
Re:Re:Re:Re:Re:Re:Re:Re:Re:Optimise Deco placement
2019-08-28 02:17:14

@PhilWin 

 

Hello, the Deco M9 plus does not support the signal source or linked Deco yet.

 

It is planned to add these features on the next firmware. 

 

You can keep an eye on official website for more updates. 

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#10
Options
Re:Re:Re:Re:Re:Re:Re:Re:Re:Optimise Deco placement
2020-08-21 07:09:42

@Kevin_Z it's been a year since the last update. when can we get the "check the signal strength from the source Deco" function fot the m9 plus?

  4  
  4  
#11
Options
12

Information

Helpful: 0

Views: 27261

Replies: 15

Related Articles
 Placement Deco M9
957 0
Location / Placement Deco satellite (vertical vs horizontal)
6070 0
 M9 optimise
321 0
Deco M5 Optimal placement
1881 0
 Placement of Deco M9 plus, vertical or horizontal does it matter?
5031 0
 Placement of Deco Units
1505 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.