If possible, disable the router function in your 2-in-1 fiber modem. Let Deco to handle the router function. This way, you can enjoy the anit-virus & parental control functions.

In Access Point mode, Deco loss these value-added functions!

Bar wrote

Well since I have a fiber connection, I only have a router which is also a modem I guess. My router is connected directly to the main deco, the other deco (I have 2) is in the living room. So I connected to the Deco Wi-Fi and ran the commands you said and I did see a few networks as the instructions say "192.168.68.X etc.." When I entered all parameters in the upgrade_GDPR and pressed "UPGRADE" it gave me an error NoValidConnectionsError: [Errno None] Unable to connect to port 22 on 192.168.68.103 When I tried different IPs, the program would just stuck for 10 minutes, tried in 2 Windows computers

Well, you have Double NAT in your network. In simple term, there are 2 servers handling the routing function. They don't work well together!

Bar wrote

I'm not sure I changed anything, I just plugged in the main M5, ran the onboarding process from the iOS Application, then disabled the main router's (not deco) Wi-Fi

Another possible issue is Firewall is On in your Mac. Turn it off to try the upgrade program again.

Bar wrote

Well since I have a fiber connection, I only have a router which is also a modem I guess. My router is connected directly to the main deco, the other deco (I have 2) is in the living room. So I connected to the Deco Wi-Fi and ran the commands you said and I did see a few networks as the instructions say "192.168.68.X etc.." When I entered all parameters in the upgrade_GDPR and pressed "UPGRADE" it gave me an error NoValidConnectionsError: [Errno None] Unable to connect to port 22 on 192.168.68.103 When I tried different IPs, the program would just stuck for 10 minutes, tried in 2 Windows computers

Can somebody provide the download link for 1.2.4 ? (for hardware version V1 and for V2)

Oldest version i can find is 1.2.5 

janoosti wrote

 

Can somebody provide the download link for 1.2.4 ? (for hardware version V1)

Oldest version i can find is 1.2.5 

 

I'm running M5 1.3.0 Beta Build 20190529 36613 for a week. So far so good. Give it a try. You can find the download link in this tread -> M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!

Wafer wrote

Well, you have Double NAT in your network. In simple term, there are 2 servers handling the routing function. They don't work well together!

Bar wrote

I'm not sure I changed anything, I just plugged in the main M5, ran the onboarding process from the iOS Application, then disabled the main router's (not deco) Wi-Fi

 

This link explains issues of double NAT: -

https://kb.netgear.com/30186/What-is-Double-NAT