Memory leak in Tp-link Archer C2300? Router reboots when free memory run out...
Memory leak in Tp-link Archer C2300? Router reboots when free memory run out...
Hello to all!
Confusing things happens with my TP-link Archer C2300.
When the router boots up, it starts with about 50% free memory, then it goes up around 2% daily. After 20-25 days, it reaches 95-97% and rooter become pretty unstable. Admin panel starts to be unresponsible, VPN connections hangs and after 1 hour of struggling, the rooter reboots itself.
Reboot won't be a problem if it would happen immediately, but throughout that 1 hour, nothing works normally.
Usually it happens when 2-3 clients connects to the router's openVPN server. I am not sure, but it seems that normal connections (cable or wireless) don't result this failure.
I am also not sure, but maybe this problem started to occure only with the new firmware.
Any idea? Beta sw? Or anything?
Thanks,
Gergely
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
it seems that the capacity is exceeded with running it nearly a month so that the router cannot bear it.
did you try to reboot it regularly? once a week, once two weeks or so? Any good news?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, it is worthy to give it a go. Cause the issue happened periodically, and reboot can solve it.
Besides, for the electrical devices, I will power cycle them randomly to keep it running normal.
- Copy Link
- Report Inappropriate Content
No, I will not do this. If I can't repair it (with a beta sw, or with something else) it should go. Because auto reboot is not possible with this router, I can't automatize the reboot process (yes I could do this with a timer plug, but that is so unprofessional...)
I handle several servers and other network devices at my workplace. Usually we never reboot anything, only if we change something in the computers. There, the Microtik rooters and switches, the servers and all of the other devices runs for years without a single reboot.
It should be (and was) the normal at home too. Previously I used a Tp-Link 1043n and until I owned I rebooted maybe once or twice (yes, there were short power outgages, but my network devices are backed up with an ups).
For me, this should be the normal. If TP-Link can't fulfil this criteria, than bye-bye TP-Link...
- Copy Link
- Report Inappropriate Content
Hi,
I think it's a little strict for a home router to keep working for 1month. If you have some servers behind the router, I think you need a more stable router to meet your demand.
- Copy Link
- Report Inappropriate Content
wifi_stealer wrote
Hi,
I think it's a little strict for a home router to keep working for 1month. If you have some servers behind the router, I think you need a more stable router to meet your demand.
My former TP-link routers could fulfil my requirements.
If we could write out a poll here, I think 99% of the votes would require "stable working without reboot for more than 1 month".
Yes, I know soho routers are not for professional use, but stability can't be the privilege of high end routers...
By the way, then please advise me which router should I buy?
(At least AC2300 capability, a few gigabit ports, VPN client what I use)
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Okay, any official help (for example a beta fw) would be good...
- Copy Link
- Report Inappropriate Content
Hi Buddy,
Can your computer keep working for a month without reboot? I don't think it's a good habbit.
- Copy Link
- Report Inappropriate Content
Hi All!
Today I received a beta fw from TP-link support. I already installed it. Fingers crossed.
(By the way support also wrote back that the issue is strange and shouldn't be normal.)
And yes, I have several computers up for much more than 1 month.
I also have a soho notebook, which is on for more than 1 year (Win 10, updates are disallowed).
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 9209
Replies: 19
Voters 0
No one has voted for it yet.