Forums/
Routers
Wednesday
ER706W WAN2 Connectivity
I have an ER706W. I have disabled the LAN/WAN1 port (SFP) and am using the WAN2 port, like so: The WAN2 port is getting a dynamic IP address: My device is on the LAN and can connect to the router, so
Forums/
Routers
Monday
ER8411 L2TP LAN-LAN VPN Intermittent Connection (Server -> Client)
I have two ER8411s in a LAN-LAN L2TP VPN configuration. The server has a public IP, the client is behind a NAT. The VPN is in a LAN-LAN configuration with route mode. The server router has a LAN IP of
Forums/
Routers
2 weeks ago
ER8411 VPN Asymmetric Performance
I have two ER8411: Router A, and Router B. Router A has a public IP address and acts as an L2TP Server (encrypted). Router B (at a different site) is behind a NAT and runs as an L2TP LAN-LAN client (e
Forums/
Routers
3 weeks ago
NetBIOS DNS
I'm trying to figure out how to get computer name resolution on my network. I have a number of devices on my LAN, with device names "COMPUTER1" (IP 182.168.0.101), "COMPUTER2" (IP 182.168.0.102), etc.
Forums/
Routers
3 weeks ago
Hardware Versioning
I'm trying to understand the hardware versioning system, and am a bit confused. I've reviewed the FAQ page on it, which says: 3. However, Vx.0 and Vx.x0 are version iterations and you can not upgrade
Forums/
Routers
3 weeks ago
L2TP LAN-LAN VPN in "Route" Working Mode
I'm setting up a LAN-LAN L2TP/IPSec VPN between two ER605s. On the client device, there's a field named "Working Mode", with options "NAT" and "Route". In the documentation, I can find very little inf