@Hunter_JG This sounds awkward. Do you have your both main SSIDs (2.4 and 5 GHz) enabled ? Did you try using a browser incognito tab for setting the IoT SSID (to bypass the browser cache) ?

@ArcherC50help Here's how to configure a router in AP mode. If the router has a dedicated operation mode for AP, you should use its WAN port for uplink connection to your main router. You should be...

@Asher09560 Download and update the router FW from its support page - here ( Published Date: 2024-07-05 ). Here's how to update the router firmware - Case 2.

@Hunter_JG You just need to enable the correct band and set the wireless network SSID (setup IoT network guide): After that, you should be able to see the IoT SSID and connect to it.

@YusufCanbolat There's two options: You can set your modem in bridge mode avoiding double NAT - details. The other option is to open the Remote Desktop port on your modem for the WAN IP address of...

@jaunt Have you tried to login the second AX23 (which is in AP mode) via web browser. This is a screenshot from Archer C64 in AP mode on which you can turn off its leds: On your second point - you...