@natedog082 It looks like SG1016PE can’t route so inter-VLAN routing needs to be done on pfSense. If you want to connect the modem to the Dell server through the switch, you need one more VLAN, say...

@bsaccone Yes, it does. Why do you want both untagged? That's not how it's done.

@bsaccone Port 24 untagged in the PC’s VLAN and the port’s VID (PVID) set to the VID. This will take care of the PC. Also, Port 24 tagged in the phone’s VLAN and the VID set on the phone. This will...

@youbarajsha So far I was able to avoid those modem/router combos so I’m not sure about your issue. Also, it looks like the bridge mode can mean different things depending on the combo. However it...

@FredGermain The DHCP server will not assign an IP address if it is not asked to do so. The DHCP server does not advertise its services, either. There is no provision for that in the DHCP protocol. A...

@Mediaconverter The second screenshot shows 4 trunk ports. This indicates 4 trunks, not one. The PVID on each trunk port is 10. The first screenshot shows that all 4 trunk ports are members of all...