JoeSeaLV3Online
Following: 0Followers: 0
Forums/ Switches
2023-01-06 03:49:37
Re:PFSense + SG108E + SG105E with multiple VLANs
@CristianoP A great resource is to download the manual for the switches from the support page. There are several examples of setting up 802.1q VLANs in there. For yours, assuming VLAN 1 is the native...
2HELPFULS
Forums/ Switches
2023-01-06 03:33:34
Re:New router cant find my TL-SG105E switch.
@Erwin05 Usually, Internet VLAN ID settings are for the WAN side of the router and often used with fiber connections.
0HELPFULS
Forums/ WiFi
2023-01-06 03:22:10
Re:TCP Connections May Fail Between Different VLANs On The Same EAP650/ EAP670/ EAP653
@treas There was acknowledgment by Hank in another thread, that firmware updates are to come out in the next 2 weeks, I hope that stands up. Also it's a bit telling that they have un-pinned this...
0HELPFULS
Forums/ WiFi
2023-01-06 03:17:51
Re:EAP670 cannot use untagged network LAN
@Damasu For my 610v2 and 650, it has consistently been that I have to set the VLAN to Off for the WLAN that is associated with the native network wired to the AP. My assumption has been that the...
0HELPFULS
Forums/ Controllers
2023-01-06 03:02:49
Re:Routers suddenly have no internet access
@Jashua_Bat2022 Could you show the port profiles from the switch config like you did the IP assignments, because it looks like the ports are assigned to an "All" or a trunked profile that is giving a...
0HELPFULS
Forums/ Controllers
2023-01-06 02:55:38
Re:Wired static clients appear in controller with invalid address
@strells What gateway are you using for IP assignment, or is the static IP being set on the computer?
0HELPFULS
1111213...