Forums/
Controllers
2023-01-06 06:15:11
@Jashua_Bat2022 Yeah disable any DHCP in any router/AP that is not the ER605. The screenshots are very helpful, there should be no clients with an IP address starting with 192.168.0.X or 192.168.1.X,...
0HELPFULS
Forums/
Controllers
2023-01-06 04:36:04
@strells I'm not the best at VPNs, but could there be conflict across the tunnel if both sides are using the same subnet?
0HELPFULS
Forums/
Controllers
2023-01-06 04:23:18
@strells Oh wow, ok, I've not heard of a network that is fully static since the 90's. But it still is most likely a double IP assignment conflict with another client.
0HELPFULS
Forums/
Controllers
2023-01-06 04:10:38
@strells It sounds like the gateway is already handing out those IP addresses you want to be static to someone else under dynamic allocation, since the gateway probably doesn't have a reservation for...
0HELPFULS
Forums/
Controllers
2023-01-06 04:05:47
@Jashua_Bat2022 Ok the no IP error after turning off the AP/router DHCP says you have conflicting DHCP service. The ER605 should be the only one doing DHCP service at this point, to make things...
0HELPFULS
Forums/
Controllers
2023-01-06 04:01:48
@Jashua_Bat2022 So it's hard to tell what the name of the profiles is that is applied to the ports, but the ports you want on the same network do not have the same profile, so they will not get the...
0HELPFULS