@Speigal Deco will not run in Access Point mode with Hub in bridge mode, so don't make change I suggested unless you restore Hub to its original mode. If LG TV appears and disappears, replace...

@Speigal I wonder if Main Deco is too busy and that causes issues. You said you have Virgin Media hub. If you haven't changed its settings, it behaves as a router. If this is correct, you can reduce...

@Cahagg01 As long as you keep getting "Abnormal WAN speed" messages in Deco app, there is nothing else to do but try different Ethernet cables and different ports on Main Deco and ISP modem/router.

@sinyagent Tapo camera runs on WiFi 2.4GHz. There are two ways to force it connect to Deco X50- outdoor: 1. Turn off WiFi 2.4 GHz band in 3100 router. This is preferred option if you do not have in...

@sinyagent You can open Deco app and check which devices connected to Deco X50- outdoor. Because you have same SSID for Deco and for G3100, it is possible Tapo camera and Samsung tab still connect to...

@Scampy74 Can you also check hardware version of your Deco S4, I am guessing you got all them as a single set so they should all be same hardware. If not same set, you'll have to check them all. See...