SX3008F vlan no internet access
Hello,
My internet modem is ATT fiber Model: BGW320-500
It is connected to Port 1 on SX3008F
My main computer is connected to Port 2 on SX3008F
All other computers are connected to a 24-Port unmanaged switch (SW24-2-2G) via Port 8 on SX3008F
I am just trying to setup one simple vlan with dhcp. I am getting the correct ip allocation - but no internet access on ipv4.
I can't even ping the gateway IP of the ATT modem (192.168.88.254)
Here are the settings snapshots:
PLEASE advise!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @ecovalence
Thanks for posting in our business forum.
Please kindly read the community guides and check out what we have on the forum:
You should read what is written in the note part. That explains the situation like yours.
- Copy Link
- Report Inappropriate Content
Hi @ecovalence
Thanks for posting in our business forum.
ecovalence wrote
I read those things. I guess I should have paid closer attention to the red text:
-----------------------------If your model is NOT a TP-Link Omada or Safestream router, you may also follow the guide above. But make sure it has multi-net NAT function or you will NOT be able to achieve multiple networks with Internet access.
Internet access replies on the multi-net NAT.
Static Routing, DHCP, and 802.1Q VLAN do NOT provide the Internet.
-----------------------------
In layman's terms; the TL-SX3008F is mostly designed to work only with Omada or Safestream routers. Most of the features and functions are dependent on multi-net NAT capability of the upstream router.
It just seems mind boggling to me that with all the tech built into this gear, why wouldn't they include a configurable WAN port and multi-net NAT?
Looking at the compatible routers, the only one that doesn't create a massive bottleneck on a 10Gbe network is the ER8411, and just barely at that (8 of the 1Gbe LAN ports are useless). I hesitate to buy this because I have two separate 5Gbe synchronous fiber connections to the internet, and this will only handle one.
-----------------------------
I bought this gear for the 10GBe ports and DHCP with TFTP options. I was hoping someone here would be familiar with the BGW320 and know a way around buying another router, perhaps with IP Passthrough and/or buying static IPs for the Public Subnets options on the BGW320. This would probably require the SX3008F to facilitate Inter-VLAN Routing, which I can't find any information on.
Any help here is much appreciated.
Correct about this highlighted part.
That ER8411 is indeed the 10Gb router we have. So far I haven't heard any news about a new model yet. If you have two lines, that indeed does not work with this router.
Even if there is LAG, that is not layer 4 LAG and we cannot add up the speed to meet the speed of 10Gbps.
The easiest way would be for you to get a device that can do both multi-net NAT as well as having at least 3 SFP+ ports.
There isn't anything else you should do with the 3008F but a static routing and a DHCP on it. In the FAQ I listed in note, 887, you should follow the steps on configuring the switch.
As for the router, it depends on what router you have. Multi-nets NAT should be configured properly to get the network to have Internet access.
- Copy Link
- Report Inappropriate Content
Hi @ecovalence
Thanks for posting in our business forum.
Please kindly read the community guides and check out what we have on the forum:
You should read what is written in the note part. That explains the situation like yours.
- Copy Link
- Report Inappropriate Content
I read those things. I guess I should have paid closer attention to the red text:
-----------------------------
If your model is NOT a TP-Link Omada or Safestream router, you may also follow the guide above. But make sure it has multi-net NAT function or you will NOT be able to achieve multiple networks with Internet access.
Internet access replies on the multi-net NAT.
Static Routing, DHCP, and 802.1Q VLAN do NOT provide the Internet.
-----------------------------
In layman's terms; the TL-SX3008F is mostly designed to work only with Omada or Safestream routers. Most of the features and functions are dependent on multi-net NAT capability of the upstream router.
It just seems mind boggling to me that with all the tech built into this gear, why wouldn't they include a configurable WAN port and multi-net NAT?
Looking at the compatible routers, the only one that doesn't create a massive bottleneck on a 10Gbe network is the ER8411, and just barely at that (8 of the 1Gbe LAN ports are useless). I hesitate to buy this because I have two separate 5Gbe synchronous fiber connections to the internet, and this will only handle one.
-----------------------------
I bought this gear for the 10GBe ports and DHCP with TFTP options. I was hoping someone here would be familiar with the BGW320 and know a way around buying another router, perhaps with IP Passthrough and/or buying static IPs for the Public Subnets options on the BGW320. This would probably require the SX3008F to facilitate Inter-VLAN Routing, which I can't find any information on.
Any help here is much appreciated.
- Copy Link
- Report Inappropriate Content
Hi @ecovalence
Thanks for posting in our business forum.
ecovalence wrote
I read those things. I guess I should have paid closer attention to the red text:
-----------------------------If your model is NOT a TP-Link Omada or Safestream router, you may also follow the guide above. But make sure it has multi-net NAT function or you will NOT be able to achieve multiple networks with Internet access.
Internet access replies on the multi-net NAT.
Static Routing, DHCP, and 802.1Q VLAN do NOT provide the Internet.
-----------------------------
In layman's terms; the TL-SX3008F is mostly designed to work only with Omada or Safestream routers. Most of the features and functions are dependent on multi-net NAT capability of the upstream router.
It just seems mind boggling to me that with all the tech built into this gear, why wouldn't they include a configurable WAN port and multi-net NAT?
Looking at the compatible routers, the only one that doesn't create a massive bottleneck on a 10Gbe network is the ER8411, and just barely at that (8 of the 1Gbe LAN ports are useless). I hesitate to buy this because I have two separate 5Gbe synchronous fiber connections to the internet, and this will only handle one.
-----------------------------
I bought this gear for the 10GBe ports and DHCP with TFTP options. I was hoping someone here would be familiar with the BGW320 and know a way around buying another router, perhaps with IP Passthrough and/or buying static IPs for the Public Subnets options on the BGW320. This would probably require the SX3008F to facilitate Inter-VLAN Routing, which I can't find any information on.
Any help here is much appreciated.
Correct about this highlighted part.
That ER8411 is indeed the 10Gb router we have. So far I haven't heard any news about a new model yet. If you have two lines, that indeed does not work with this router.
Even if there is LAG, that is not layer 4 LAG and we cannot add up the speed to meet the speed of 10Gbps.
The easiest way would be for you to get a device that can do both multi-net NAT as well as having at least 3 SFP+ ports.
There isn't anything else you should do with the 3008F but a static routing and a DHCP on it. In the FAQ I listed in note, 887, you should follow the steps on configuring the switch.
As for the router, it depends on what router you have. Multi-nets NAT should be configured properly to get the network to have Internet access.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 692
Replies: 4
Voters 0
No one has voted for it yet.