Hello, I am in the UK and my APs are EU version 1. On the latest controller i had an alert saying there was an upgrade available for my APs. Old version was 1.0.3 no issues. New version upgraded: 1.0.

After firmware upgrade AP is in boot loop and is not accessible and status is disconnected all the time, every aprox. 5 minutes last seen is updated. Overview [..] Model: EAP670(EU) v1.0 Firmware Vers

The EAP245 (US) has transmission power in the specs as "<27dBm". In the settings in the Linux Controller, the maximum setting is only 24dBm. Is this a controller bug? Also, on a related topic, the EAP

I setup a guest network as follow: SSID: guest subnet 192.168.100.0/24 I enabled "Guest Network" to isolate each wireless clients for security, a captive portal is running at the guest network gateway

I have only one EAP610 and want to create a guest network which is secured by rules which I have set in my firewall which is behind the access point. I want to be able to set AP Isolation by itself so

Hello I've recently acquired 2 EAP650 to deploy and replace another WiFi system. While testing the configuration I've come to the issue that the SSIDs that are on tagged VLANs have much lower throughp