Guest network with EAP ACL can't connect to VLAN gateway

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Guest network with EAP ACL can't connect to VLAN gateway

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Guest network with EAP ACL can't connect to VLAN gateway
Guest network with EAP ACL can't connect to VLAN gateway
2022-08-06 03:11:37

I setup a guest network as follow:

 

SSID: guest

subnet 192.168.100.0/24

 

I enabled "Guest Network" to isolate each wireless clients for security, a captive portal is running at the guest network gateway (192.168.100.1)

so I added an EAP ACL rule:

 

from SSID: guest

to IP Group 192.168.100.1/32

 

but it doesn't work, all clients connected can't reach 192.168.100.1 until I disable "Guest Network"

 

Any hints?

 

 

 

 

  0      
  0      
#1
Options
5 Reply
Re:Guest network with EAP ACL can't connect to VLAN gateway
2022-08-06 19:31:29

  @kkyyww Can you provide screenshot from that EAP ACL rule?

 

I'm using similar thing and it works fine.

I have policy "Permit" and protocol "UDP, TCP, ICMP".

  0  
  0  
#2
Options
Re:Guest network with EAP ACL can't connect to VLAN gateway
2022-08-18 10:04:32

I think I found an EAP ACL bug

 

I created several SSID for my guest network, 

 

guest

pantry

conference room

 

all actually shared the same VLAN (192.168.100.0/24) , just with different SSID name for different AP locations.

 

they all shared a same EAP ACL rule to permit 192.168.100.1 ( the VLAN subnet gateway, which run the captive portal as well )

 

If I create 3 EAP ACL rules and 1:1 map to the 3 different SSID, then the ACL rules work. All SSID can reach 192.168.100.1 

 

If I just create 1 EAP ACL rule and share it with more than 1 SSID, then the ACL rule stop working, all SSID cannot reach 192.168.100.1

 

Wish TP-Link can fix this bug

 

 

  1  
  1  
#3
Options
Re:Guest network with EAP ACL can't connect to VLAN gateway
2022-08-19 09:19:18 - last edited 2022-08-19 09:28:25

  @kkyyww 

nope. did not reproduce this. it works on three ssids: 1 vlan 1 ssid and 2 vlan 100 ssid(both enabled guest network)

allow

3 ssid > 192.168.100.1/32 ip group. 

ping works great.

could be your protocol issue?

controller version?

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  0  
  0  
#4
Options
Re:Guest network with EAP ACL can't connect to VLAN gateway
2022-08-19 15:18:19
Protocols: All Controller: 5.4.6 linux
  0  
  0  
#5
Options
Re:Guest network with EAP ACL can't connect to VLAN gateway
2022-08-19 15:24:00

one more thing, my controller is at different VLAN and subnet from my guest wifi VLAN

 

controller IP is 192.168.99.1

guest wifi VLAN 192.168.100.0/24, gateway 192.168.100.1

 

  0  
  0  
#6
Options