@daaveh Hi, If your TP-Link router is a somewhat recent model that supports OneMesh/EasyMesh, but you want your RE550 to have SSIDs that are separate from the SSIDs of your TP-Link router, then make...

paoz wrote But if I connect it to other ports that isn't IP-Phone (e.g. Internet, IPTV), I can get it but nothing is happening when I try to set it up. @paoz Verify again that you have setup...

@AndyRozman The versions of the devices don't matter. Any Powerline devices that follow the "HomePlug AV2" standard should work together without issues, even if they were made by different...

@Morholt Hi, Please check that the USB cable that came with the TX20E is wired properly. The little connector that plugs into the TX20E should be wired [ red | white | green | black ] and the F_USB...

@AndyRozman Hi, If you swap both TL-PA8033P devices around (i.e. bring the one from the living room to your room and the one from your room to the living room) does the on/off problem follow the...

@dazza72 The answer to your question is yes. TP-Link decided to equip their low-cost range extenders (including the RE200) with 100 Mbps Ethernet ports....