@Chris227 Hi, If you are sure that password wasn't set by you, then reset the RE450 V4 by pressing and holding its "Reset" button (inside the small hole) and wait for a minute or two. Then connect...

@bc1155 Hi, Verify that no other device in your network uses an IP address that is identical to the Archer AXE75's LAN IP address. In case you have Wi-Fi access points or range extenders connected to...

@ghasem200 Hi, The driver versions that came out in the last two years or so do all work well with these 2.4 GHz Wi-Fi adapters. I'd say you can't go wrong if you opt for the latest version available...

@Netli Hi, The Archer TX20U Plus has also been reported to cause ping spikes for some users. (btw, on every thread in this forum you can find a "Related Articles" section towards the bottom right,...

By the way, even with the newest firmware version 1.4.3 an Archer AX53 used as EasyMesh Satellite never shows more than one connected client device within its web management interface. This bug was...

manjtb350 wrote @woozle Because the first archer (AP mode WAN) is connected to the GX modem (LAN), I see 4 LEDs ON. The second archer (WAN) is connected to the GX modem (LAN) as per your steps. When...