Configuration Guide Solution to This Switch Type Is Inconsistent with the Switch Type Configured for the Site
Configuration Guide Solution to This Switch Type Is Inconsistent with the Switch Type Configured for the Site
This Article Applies to:
ES200 series or Omada Easy Managed(AKA Easy Smart) switch.
Estimate an update to improve the user interaction on Omada Controller V5.15.20.X.
Steps:
1. When you create a new site:
You are required to configure the Switch Type during the creation. Please make sure you select the Easy Managed switch.
2. When you have an existing site:
To modify the existing settings, you need to go to Global View > Edit your existing site.
Update Log:
Dec 12th, 2024:
Release of this article.
Recommended Threads:
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Feedback:
- If this was helpful, welcome to give us Kudos by clicking the upward triangle below.
- If there is anything unclear in this solution post, please feel free to comment below.
Thank you in advance for your valuable feedback!
------------------------------------------------------------------------------------------------
Have other off-topic issues to report?
Welcome to > Start a New Thread < and elaborate on the issue for assistance.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
the Device has been adopted to the controller and is on firmware version 3.20.5 Build 20250117 Rel.60471
for some reason the site is stuck on the option to use easy managed switches and cant be changed from that, is this a bug in the firmware?
- Copy Link
- Report Inappropriate Content
Hi @MJ911
MJ911 wrote
the Device has been adopted to the controller and is on firmware version 3.20.5 Build 20250117 Rel.60471
for some reason the site is stuck on the option to use easy managed switches and cant be changed from that, is this a bug in the firmware?
I am confused. Doesn't this guide tell you where you should change it? Not from the site. From the Global View. It's different. Do you follow it?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
MJ911 wrote
I followed the instructions correctly, the screenshot is of the site accessed from the global view page, clicked on edit as per instructions, but the "easy managed" and "Smart / L2+ / L3" option ticks are unselectable and cannot be changed. i want to de-select the easy managed option as it is not applicable, and preventing specific settings on the switch profile and LAN options.
I believe the firmware does not support it.
If you mean once you selected it, you cannot de-select it. Yes, that's the case. You need to delete the site and create a new one.
You might submit this to the controller site for an investigation. I assume it involves some codes which may break the site. So, it limits this.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 1309
Replies: 14
Voters 1
