ER605 does not assign IP to VLAN clinets

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 does not assign IP to VLAN clinets

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 does not assign IP to VLAN clinets
ER605 does not assign IP to VLAN clinets
2022-05-22 20:00:09 - last edited 2022-05-23 06:16:26
Model: ER605 (TL-R605)  
Hardware Version: V7
Firmware Version: 2.0.1 Build 20220223 Rel.68551

Hi there,

 

I am trying to setup a vlan at home. Here's my configuration:

 

internet --- modem --- ER605 (port wan/lan 1) --- EAP245

 

I setup both of them on the Omada Software Controller and defined a vlan ID 10 with an ssid vlan ID 10. Clients connecting to that ssid do not receive an ip address. Here are some screenshots:

 

 

 

 

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:ER605 does not assign IP to VLAN clinets-Solution
2022-05-22 21:36:24 - last edited 2022-05-24 05:47:23

 

Just enable it and try you have connected this port

 

  @SaiGer 

Recommended Solution
  3  
  3  
#4
Options
5 Reply
Re:ER605 does not assign IP to VLAN clinets
2022-05-22 21:25:16

  @SaiGer 

 

Try to enable WAN/LAN2 om red network

 

  0  
  0  
#2
Options
Re:ER605 does not assign IP to VLAN clinets
2022-05-22 21:33:34 - last edited 2022-05-22 21:33:52

  @shberge Can you please explain the reasoning behind that. No cable is connected to the wan/lan2. There's only one cable connected from wan/lan1 to the access point.

  0  
  0  
#3
Options
Re:ER605 does not assign IP to VLAN clinets-Solution
2022-05-22 21:36:24 - last edited 2022-05-24 05:47:23

 

Just enable it and try you have connected this port

 

  @SaiGer 

Recommended Solution
  3  
  3  
#4
Options
Re:ER605 does not assign IP to VLAN clinets
2022-05-22 21:44:16

  @shberge You were right. Thanks

  2  
  2  
#5
Options
Re:ER605 does not assign IP to VLAN clinets
2022-05-24 02:28:52

Dear @SaiGer, @shberge,

 

Sorry to interrupt here. But I'd like to suggest you re-edit your post and put mosaic on the image about product Serial Number and MAC Address. For security concern, I would suggest not posting this info (Serial Number or MAC Address) in your thread in the future, it's not something we need for troubleshooting anyway.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#6
Options

Information

Helpful: 0

Views: 1055

Replies: 5

Related Articles