Business Community > All Threads > ER605 adding clients to IP GROUP
< All Threads

ER605 adding clients to IP GROUP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 adding clients to IP GROUP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 adding clients to IP GROUP
ER605 adding clients to IP GROUP
2024-04-29 20:49:33 - last edited 2024-05-06 12:18:56
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version:

Have tried all avenues and resorting to asking here.

 

New to the ER605.

I want to block access to the WAN port for all new clients.

 

Once I have reserved the IP address, I wish to add to one of two IP Groups - One unrestricted, one restricted, using web filters

I cannot figure out how to add a client IP address to an IP group. I must be missing something simple...
 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:ER605 adding clients to IP GROUP-Solution
2024-04-30 01:26:57 - last edited 2024-05-06 12:18:56

Hi @cmfield 

Thanks for posting in our business forum.

To block the web GUI of the router, you should block the port 80 and 443 from the clients. Not just the IP address, it should work with the port.

Standalone:

Controller:

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:ER605 adding clients to IP GROUP-Solution
2024-04-30 01:26:57 - last edited 2024-05-06 12:18:56

Hi @cmfield 

Thanks for posting in our business forum.

To block the web GUI of the router, you should block the port 80 and 443 from the clients. Not just the IP address, it should work with the port.

Standalone:

Controller:

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  0  
  0  
#2
Options
Re:ER605 adding clients to IP GROUP
2024-04-30 15:25:00

  @Clive_A 

 

Thanks, I get that, but how do I add a newly connected client to an IP group?

A client connects, and I reserve thier IP address. I then want to add them to one of two IP Groups, with different permissions for internet access.

I can set the IP groups etc, but I don't see the point in having IP ranges for them unless I can issue a static lease to a different range (Gp1: 192.168.0.100-199 or Gp2: 192.168.0.200-250 for example).

 

Gp1 to have full internet access, and Gp2 to have restricted (by URL etc) access. All from the same AP on the WAN port. Or is this not possible without a second AP?

  0  
  0  
#3
Options
Re:ER605 adding clients to IP GROUP
2024-05-06 12:18:47

Hi  @cmfield 

cmfield wrote

  @Clive_A 

 

Thanks, I get that, but how do I add a newly connected client to an IP group?

A client connects, and I reserve thier IP address. I then want to add them to one of two IP Groups, with different permissions for internet access.

I can set the IP groups etc, but I don't see the point in having IP ranges for them unless I can issue a static lease to a different range (Gp1: 192.168.0.100-199 or Gp2: 192.168.0.200-250 for example).

 

Gp1 to have full internet access, and Gp2 to have restricted (by URL etc) access. All from the same AP on the WAN port. Or is this not possible without a second AP?

This is gonna be manual. There is no automation for that.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 632

Replies: 3

Related Articles
IP Group errors
754 0
Unable to create entry for single IP in Preferences -> IP Group -> IP Address on ER605
742 0
ER605 does not assign IP to VLAN clinets
1118 0
ER605 VLAN not working after adding OC200
1084 0
ACL - Port forward limit to source ip - ip group not working on ER605
1499 0
ER605 -> Omada | Access Control | Can we add Authenticaion-Free Client with IP-Group Instead of IP
780 3
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.