Business Community > All Threads > Assign "one" IP/VLAN to port on ER7206
< All Threads

Assign "one" IP/VLAN to port on ER7206

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Assign "one" IP/VLAN to port on ER7206

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Assign "one" IP/VLAN to port on ER7206
Assign "one" IP/VLAN to port on ER7206
2023-01-19 19:04:56 - last edited 2023-04-26 07:46:02
Tags: #WAN Setup #port
Model: ER7206 (TL-ER7206)  
Hardware Version:
Firmware Version:

Hello

 

I have one device that I would like to connect via network cable to ER7206 but when I do that device gets IP address of managed network.

Tried to edit and de-select and use port 5 but I see this message:

 

 

 

Is it possible to assign HOME VLAN IP address range to specific port on ER7206 ?

1x ER-7206 1x C200 2x EAP245 1x SG2008P
  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Assign "one" IP/VLAN to port on ER7206-Solution
2023-04-26 07:45:57 - last edited 2023-04-26 07:46:02

Hello @ProSumerTester and other community members,

 

I'd like to update this feature request here.

 

Omada Software Controller v5.8 and OC200/OC300 Controller v5.9 has added PVID config for Omada Routers.

Please ensure that both your Omada Controller and Router are updated to the firmware adapted to Controller v5.8 or later version.

 

Note:

For OC200/OC300 controller v5.9, you may need to manually upgrade the firmware via local access as it is a major firmware upgrade.

 

FYI, the following router firmware has added support for modifying port PVID in Omada Controller.

ER605 V1_1.2.3_Build 20230413 Beta Firmware For Trial (Released on Apr 14th, 2023)

ER605 V2_2.1.1 Official Firmware (Released on Jan 30th, 2023)

ER7206 V1_1.3.0 Official Firmware (Released on Mar 28th, 2023)

ER7212PC V1_1.0.3 Official Firmware (Released on Mar 21st, 2023)

 

>> Where to configure the PVID?

 

Go to Devices, highlight your router and navigate to Ports in the right panel, then edit the specific port to configure the PVID.  

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#8
Options
9 Reply
Re:Assign "one" IP/VLAN to port on ER7206
2023-01-20 07:21:04 - last edited 2023-04-26 07:44:59

  @ProSumerTester 

 

unfortunately you cannot configure the ports on the ER7206 this way, default lan cannot be changed. the only way to do this is to connect to a switch and configure the ports there.

 

On the latest update to ER605V2 you can change Pvid on a router port, I think this opportunity also comes on ER7206 once in the future.

 

  2  
  2  
#2
Options
Re:Assign "one" IP/VLAN to port on ER7206
2023-01-21 12:20:10

  @shberge 

Thank you for clarifying this for me.

 

Hopefully this functionality will come very soon to ER7206 as well.

 

1x ER-7206 1x C200 2x EAP245 1x SG2008P
  0  
  0  
#3
Options
Re:Assign "one" IP/VLAN to port on ER7206
2023-01-22 17:32:57
Does anyone know if that's the case with the new ER7212PC? After all, it has a lot of switch ports.
  0  
  0  
#4
Options
Re:Assign "one" IP/VLAN to port on ER7206
2023-01-23 12:48:24 - last edited 2023-01-23 12:48:53

This issue is also discussed here as a proposed feature. Please, vote for it, and it might help convince these guys to implement it and stop advertising this as a 3-in-1 product.

 

https://community.tp-link.com/en/business/forum/topic/590922

 

Thank you

  0  
  0  
#5
Options
Re:Assign "one" IP/VLAN to port on ER7206
2023-01-23 12:53:39
Voted, hopefully this feature will be added across the board
1x ER-7206 1x C200 2x EAP245 1x SG2008P
  0  
  0  
#6
Options
Re:Assign "one" IP/VLAN to port on ER7206-Solution
2023-04-26 07:45:57 - last edited 2023-04-26 07:46:02

Hello @ProSumerTester and other community members,

 

I'd like to update this feature request here.

 

Omada Software Controller v5.8 and OC200/OC300 Controller v5.9 has added PVID config for Omada Routers.

Please ensure that both your Omada Controller and Router are updated to the firmware adapted to Controller v5.8 or later version.

 

Note:

For OC200/OC300 controller v5.9, you may need to manually upgrade the firmware via local access as it is a major firmware upgrade.

 

FYI, the following router firmware has added support for modifying port PVID in Omada Controller.

ER605 V1_1.2.3_Build 20230413 Beta Firmware For Trial (Released on Apr 14th, 2023)

ER605 V2_2.1.1 Official Firmware (Released on Jan 30th, 2023)

ER7206 V1_1.3.0 Official Firmware (Released on Mar 28th, 2023)

ER7212PC V1_1.0.3 Official Firmware (Released on Mar 21st, 2023)

 

>> Where to configure the PVID?

 

Go to Devices, highlight your router and navigate to Ports in the right panel, then edit the specific port to configure the PVID.  

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#8
Options
Re:Assign "one" IP/VLAN to port on ER7206
2023-04-26 19:55:04

  @Fae 

I upgraded both router and omada hardware controller, then connected network cable to LAN1 on router and configured it to VLAN 10 but IP address is not assigned automatically to this port.

Am I doing something wrong ?

1x ER-7206 1x C200 2x EAP245 1x SG2008P
  0  
  0  
#10
Options
Re:Assign "one" IP/VLAN to port on ER7206
2023-04-27 02:54:46

Hello @ProSumerTester 

 

What device is connected to the LAN1 port on the router? Is it an ordinary PC or a vlan capable device like a managed switch?

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#11
Options
Re:Assign "one" IP/VLAN to port on ER7206
2023-04-27 08:25:21

  @Fae 
Tried with normal PC as I do not have managed switch nearby.

1x ER-7206 1x C200 2x EAP245 1x SG2008P
  0  
  0  
#12
Options

Information

Helpful: 1

Views: 1969

Replies: 9

Tags

WAN Setup
port
Related Articles
Can I DENY one VLAN to VLAN but also PERMIT to One IP/Port?
818 0
Is it mandatory to assign VLAN to a port ?
722 0
Assign clients to VLAN
1912 0
ER605 does not assign IP to VLAN clinets
1054 0
ER7206 Trunk Vlan with TL-SG108E
1691 0
WAN IP ALIAS ON ER7206, IS IT POSSIBLE to do it WITHOUT One-to-One Nat
1983 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.