Morning all,

I know this question has been asked a million times before, but I've checked and re-checked everything and still the little sucker keeps doing it.

I have an OC200 (v4.3.5) that's currently only got 1 EAP-225 being managed by it, it's a test deployment on a campsite.

The difference here (or maybe not) is that the internet connection is provided by a 5G Mobile CPE (only 4G coverage right now), we've got good signal strength and average around 8-10Mbs download.

I've checked cabling, replaced the PSU for a TP Link 15W PoE Injector, replaced cabling, made sure it's got a connection, but it still keeps disconnecting from the cloud.

It is on a NAT address behind the 5G CPE, the EAP is plugged into the pass-through Ethernet port on the OC200 (Don't know if this could cause an issue or not)

The OC200 still continues to function fine even when it says it's offline from the cloud, so I don't think it's a bandwidth issue.  Last night I received over 70 notifications randomly saying it was offline and then online, no specific pattern, usually it's back connected within a couple of minutes.

Guests are not experiencing any drop out of service, so that proves the internet connection is stable.

I'm open to any ideas that anyone may have, while I know it's not disrupting service, the constant alerts are getting annoying and does mean that I may not be able to remotely connect to manage it.

Ironically, during testing here with a fixed connection, it performed flawlessly, so it somewhat does point to the nature of the connection, but evidence suggests otherwise.

If anyone has any ideas on what I can try next, I'd appreciate it.

Best Regards

Chris