SOHO Switches
Firmware Version 1.0.0 Build 20211209 Rel.52369 Hardware Version TL-SG108E 6.0 The TL-SG1016DE is printed on the front of the box and there are 16 ports on the device. However the firmware clearly say
Firmware Update
1Helpful
99Views
Hi, I'm already struggling couple of days with the topic so i need your help :) Lets start with the topology description ROUTER 1 -> ROUTER2 (access point) -> ROUTER3 (access point) -> SG108PE -> EAP1
ConfigurationPoENetwork ConnectivityFirmware Update
1Helpful
231Views
Hi, Had some issues with my TL-SG108E V6 not working as intended only doing 100M vs 1000M until I reseat the Rj45, put it down to a bad termination but this didn't work, so I decided to update from TL
Firmware UpdateNetwork ConnectivityConfiguration
3Helpful
488Views
Hello, Can anyone help with the latest available FW for TL-SG1024DE v4? The stock fw is almost 5 years old now (1.0.0 Build 20191128 Rel. 43130) and wondering if a new version is available. Thanks for
Firmware Update
1Helpful
474Views
I have a new TL-SG1428PE up and operational in our network but I went to update the firmware and am confused if it is Hardware Version 3.0 or 3.6. The Management portal has a hardware version of TL-SG
Firmware Update
1Helpful
347Views
I bought this switch last week and initially everything worked as expected. But because there has been a recent firmware update that included a security fix, I had to install it. I made sure I selecte
Firmware UpdatePoE
0Helpful
484Views
Hello I have a TL-SG116E firmware version 1.0.0 build 20191128 rel.40081 Hardware version is 1.20 The latest update for firmware that I see in downloads is TL-SG116E(UN)_V1.2_20190909 Does anyone know
Firmware Update
0Helpful
564Views
On the off site Link to page there is a fresh update numbered TL-SG105PE(UN) _V1_1.0.0 Build 20230218. And how can I actually update it from the previous firmware if I see the following in the update
Firmware Update
By
Annihilator
· Latest post 2023-08-26 16:22:40
by Annihilator
0Helpful
567Views
Hello, I am facing a problem while upgrading firmware to TL-SG1428PE(UN)_V3_1.0.0 Build 20230220. At 15% of the upgrading process I get the message, that an error occurred while upgrading. Unfortunate
Firmware Update
0Helpful
622Views