Tapo Smart Switch
I have a feature request to enhance the flexibility of S220. Currently, the S220 is “hardcoded” with the left button physically linked to output A and the right button to output B. While this basic fu
Feature Request
0Helpful
23Views
Hi, I found an issue when I would try to replace old switch with S220. In which I will put Old Left L1 (Brown) -> new L1 Old Right L1 (Brown) -> new L2 Old Left COM (Red) -> ? Old Right COM (Red) ->?
Installation
0Helpful
49Views
With the weather getting colder, I thought I’d give my Tapo smart home setup a new twist. I set an automation to turn on the smart plug whenever the temperature drops below 12°C. Seemed simple enough—
0Helpful
72Views
Hi, I ma struggling to swap my current 2 way to tapo s220
0Helpful
72Views
Hi everyone, I wanted all the switches at the house to match but do not want to connect them all to wi-fi. Is there a way to stop the switches from blinking orange and green and stay just green withou
0Helpful
54Views
In the Tapo app I am seeing references to a model S515 and S515d. Based on web searches these seem to be three way switches. Will these be made available is the US?
1Helpful
226Views
Is it possible to use the Tapo S210 in button mode? To turn on only for 1 second after pressing and then turn off by itself. I want to use it instead of the old button to open the gate.
0Helpful
96Views
After enabling the double tap feature of my Tapo S200B Buttons, the feature then says "not enabled" if checking in my Smart Automations later that require double tap (next day for example).
Smart Actions
1Helpful
793Views
I need advice and help wiring up an S220 smart switch, given the old UK wiring in the attached diagram of a 2-gang switch for two independent lights. Thank you. Peter Phillips
0Helpful
93Views
I had automation set up in Tapo app which used the T100 sensor to switch on my attic stair lights with a S210 switch. That worked fine but now I'm switching to Home assistant automations and wanted to
0Helpful
140Views