@terziyski Thank you! Definitely answered my question(s).

I'm currently using the AX1800 that is One Mesh capable and have the RE505x One Mesh added and works really well but I cannot seem to find a definitive answer on what determines your device to switch...

@Plantman2000 I have the AX1800 V1.2 and noticed it primarily on the Tether app then going to the IP address and it being different, it's nothing that really bothered me but i too noticed it. It's...

@Kojootti_ Been trying to reply but every reply says i have an external link in it...try doing a hard reset, once you are up and running then see if you wifi channels are causing the interference (i...

@blka Good info, I've had to set it up using 6to4 tunnel but this may be the best solution rather than me fooling around with setting up all the other crap. Thanks again for the post

@Kevin_Z @blka @mfrymyer Hey guys I have Google fiber and the only way I've gotten ipv6 when using my TP-Link instead of the garbage equipment the gave me is by setting up a 6to4 tunnel and using the...