swarfendor437LV1Online
Following: 0Followers: 0
Forums/ Wi-Fi Routers
2020-07-11 19:20:11
Re:How to allocate TCP UDP Ports on Archer 2800 for PS4 and Humax PVR-50000T plus is firmware current?
@swarfendor437 Well I tried to add ranges in Service Filtering but that stopped connection to Internet!
0HELPFULS
Forums/ Wi-Fi Routers
2020-07-11 17:44:23
Re:How to allocate TCP UDP Ports on Archer 2800 for PS4 and Humax PVR-50000T plus is firmware current?
@swarfendor437 OK, I think I have found it under Service Filtering - but not sure how to deal with SSL 443?
0HELPFULS
Forums/ Wi-Fi Routers
2020-07-11 17:32:27
How to allocate TCP UDP Ports on Archer 2800 for PS4 and Humax PVR-50000T plus is firmware current?
Hi, I am using an Archer VR2800 and have reserved IP addresses for both the PS4 Playstation and Humax PVR-2800 connected to the router via TL-PA9020P KIT PowerLine Adapters. Have been having issues...
0HELPFULS
Forums/ Wi-Fi Routers
2020-06-11 12:11:05
Re:My ISP has stopped me from using Archer VR-2800 at their end!
@swarfendor437 Well I went to the TP site for the online manual - sorted it that way! Used a notebook to connect wirelessly and set it up from there. Forgot about the steady light connection thing!
0HELPFULS
Forums/ Wi-Fi Routers
2020-06-09 19:24:09
My ISP has stopped me from using Archer VR-2800 at their end!
I have had some issues with my ISP who refused to help with Internet outage unless their router was attached. There was numerous outages over a week ago across the UK. Can I connect the VR2800 to the...
0HELPFULS
Forums/ Powerline Adapters
2020-06-03 16:14:03
Re:Powerline Adapters no longer getting ip address for end users
@Tony Well had to bite the bullet. ISP being a pain in the butt - would not help as I was not using their router. My Archer VR2800 is now 'dead' because the ISP changed the settings at their end. Had...
0HELPFULS
12