Home Network Community > Wi-Fi Routers > How to allocate TCP UDP Ports on Archer 2800 for PS4 and Humax PVR-50000T plus is firmware current?
< Wi-Fi Routers

How to allocate TCP UDP Ports on Archer 2800 for PS4 and Humax PVR-50000T plus is firmware current?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to allocate TCP UDP Ports on Archer 2800 for PS4 and Humax PVR-50000T plus is firmware current?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to allocate TCP UDP Ports on Archer 2800 for PS4 and Humax PVR-50000T plus is firmware current?
How to allocate TCP UDP Ports on Archer 2800 for PS4 and Humax PVR-50000T plus is firmware current?
2020-07-11 17:32:27
Model: Archer VR2800  
Hardware Version: V1
Firmware Version: 0.3.0 0.9.1 v006c.0 Build 170809 Rel.42095n

Hi,

 

I am using an Archer VR2800 and have reserved IP addresses for both the PS4 Playstation and Humax PVR-2800 connected to the router via TL-PA9020P KIT PowerLine Adapters. Have been having issues connecting to PSN on PS4 and some streaming on-demand services on the Humax box. PSN recommend allocating the following Ports to be open for effective connection to PSN:

TCP: 80, 443, 3478, 3479, 3480

UDP: 3478, 3479

 

Humax advises:

HTTP: 80

HTTP: 8080

SSL:443

 

Is it possible to do this on Archer VR2800?

 

Thanks.

  0      
 
  0      
 
#1
Options
4 Reply
Re:How to allocate TCP UDP Ports on Archer 2800 for PS4 and Humax PVR-50000T plus is firmware current?
2020-07-11 17:44:23

@swarfendor437 

 

OK, I think I have found it under Service Filtering - but not sure how to deal with SSL 443?

 

  0  
  0  
#2
Options
Re:How to allocate TCP UDP Ports on Archer 2800 for PS4 and Humax PVR-50000T plus is firmware current?
2020-07-11 19:20:11

@swarfendor437 Well I tried to add ranges in Service Filtering but that stopped connection to Internet!

 

  0  
  0  
#3
Options
Re:How to allocate TCP UDP Ports on Archer 2800 for PS4 and Humax PVR-50000T plus is firmware current?
2020-07-13 20:39:57

@swarfendor437 

 

You need to do port forwarding or otherwise known as using virtual servers. You can find that by going to Advanced > NAT Forwarding > Virtual Servers.

  0  
  0  
#4
Options
Re:How to allocate TCP UDP Ports on Archer 2800 for PS4 and Humax PVR-50000T plus is firmware current?
2020-07-14 12:14:54
If one of your devices allows you to set the port numbers in its settings, change the port 443 number in the device to something like 8443 and also in the router to match.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1001

Replies: 4

Related Articles
My ISP has stopped me from using Archer VR-2800 at their end!
523 0
"Ensure ports UDP 500, UDP 4500 and UDP 123 are opened" but how?
356 0
Archer C5400v2 ignoring TCP PSH flags?
690 0
Deco UDP problem
155 0
Archer C9 - configure UDP broadcast to a specific ip - Possible?
3208 0
C3200 UDP datagram checksum
480 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.