@AddisonGeek Sounds like you are not getting an IP on the lan. power off the modem and the router, wait 5-10 min, power on the modem, wait a few, then power on the router. Than check to see if it...

@DavidMebaneNC Assuming a modem that is rated for the speed and has a lot of up and down channels should handle the load fine. Lengthof Ethernet cable affects speed. Each device in the stream takes a...

@AZRE I would suspect a bad router or bad connectors in the router or wires. If one of the eight wires/pins is not making contact, then the speed will drop tp 100.

@DavidMebaneNC It can be explained but takes a lot to do so. There are many resources on the internet that explains it. basicly, you can only go as fast as the slowest link in the network. If you are...

@beepboopmoop Sounds like you are not getting an ip for the lan. power off the modem and router, wain 5-10 min, power up the modem and wait a bit, then power up the router, wait a bit and see if it...

@Wathen I would check the antennas to be sure they are not loose. I would try different channels, security settings, and modes.