@Greeny96 I would keep them different as the wider the band the more likely you get interference. As far as channel selection, it depends on other networks in the area. If auto works fine then stay...

@rctp Check to see if you have it turned off Go to advance settings then system, then led control.

@Marshmutt See user manual and the connections, hot spot mode.

@KcPele Did you set up address reservation for the device you want to port forward so the ip stays the same?

@nfamos1 I would look at the router and modem logs. See if you can establish a time. Also consider that it might be the isp, modem, or even your electric power that is the issue. Be sure the firmware...

@Zicklag Do not know of anyway to use the other ports on this router. If it were me, I would open it up and see if there is something I could fix or replace. Might be just a solder joint that was...