Forums/
Deco
9 hours ago
@carl for example a common line is daemon.err udhcpd[2048]: clear ip 3444a8c0 if you convert the hex to an ip address, it is the ip of a device on the network written backwards! this is followed by...
0HELPFULS
Forums/
Deco
10 hours ago
Brian2700 wrote @Carl Thank you for your suggestions! I swapped the cable today. No modem, I'm on a fiber system with the last device belonging to the ISP. Their tests were sat, but as you say could...
0HELPFULS
Forums/
Deco
13 hours ago
@Carl Thank you! Very helpful and I appreciate your time in explaining this.
0HELPFULS
Forums/
Deco
Yesterday
@Carl Thank you for your suggestions! Carl wrote @Brian2700 The Deco can't release the IP address, that is handled from service level at the ISP. It could be that the ethernet between the modem and...
0HELPFULS
Forums/
Deco
Tuesday
My router is an X55 V1.26 with the latest firmware. Is there a way to stop this from happening?
0HELPFULS
Forums/
Deco
Tuesday
I have the Deco X55 Ver 1.26, recently updated to firmware 1.4.0 I have been having periodic drops in service, most noticable during video calls, where the call drops out but picks back up...
3HELPFULS