BE65 V2 log errors

BE65 V2 log errors

BE65 V2 log errors
BE65 V2 log errors
2024-11-27 12:58:40
Model: Deco BE65  
Hardware Version: V2
Firmware Version: 1.1.0 Build 20240923 Rel. 21705

I just happened to look at the LOG today and see this error (continual):

 

Wed Nov 27 06:58:40 2024 daemon.err nrd[26373]: triggerMonAPSteering: Failed to get uplink rssi for E6:60:17:EC:27:09

 

What does this mean? Something to worry about?

 

I am on Windows 11 24H2 which 'supports' WiFi 7.

 

I am connected to Wifi MLO band, and Windows does see this:

 

6457f60e7d564a4889571cd3fa9f0ac7

 

However, since upgrading, my speed tests have dropped to below 800 from 960Mbps wireless on an Intel M.2 BE200 card (with the latest Intel Driver). Some speed differences before but always 880Mbps or better on both the 6Ghz and MLO SSID's?

 

This is what I'm getting right now on MLO (have 1Gbps down/40Mbps up):

 

2d081347b67848d1a63f5b0ef12a17bd

 

I now switched to the 6Ghz SSID and get this:

 

f95bd3d616e74c6caaeb8ff31971f85b

 

Slightly slower, but no where near what I was getting on the old MS Windows version, but 24H2 does support Wifi 7 and did have many Network changes?

 

I was testing wireless, 10 feet from the router, and when Speed tested on the router using Deco app on the iPhone 16, I get the speed I expect:

 

0ed89d08d2694e93bf2d78d0600d135c

 

I am at a loss when the Wireless speed had been higher before?

 

Yes, they do vary, even from test to test, and even sites, but I did have these speeds before on the old Windows version:

 

c52a6daf07be423a89e2024d5f4dec74

 

I can't get a handle on this?

 

  1      
  1      
#1
Options