Home Network Community > Wi-Fi Routers > QoS Device Priority missing active clients
< Wi-Fi Routers

QoS Device Priority missing active clients

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

QoS Device Priority missing active clients

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
QoS Device Priority missing active clients
QoS Device Priority missing active clients
2020-04-01 01:22:43 - last edited 2020-04-02 21:29:51
Model: Archer C3150  
Hardware Version: V2
Firmware Version: 3.0.0 0.9.1 v005f.0 Build 170926 Rel.63400n

I'm attempting to setup a client for QoS Device Priority, but the client I wish to prioritize does not appear in the Device Priority list. All other clients are listed within the Device Priority list, except the one I wish to prioritize.

 

Total active clients: 13

Clients in QoS by device: 12

 

I have used both the client I am attempting to prioritize, as well as another client on the network and both show the same missing client in the QoS list. Any thoughts?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:QoS Device Priority missing active clients-Solution
2020-04-02 16:15:38 - last edited 2020-04-02 21:29:51

@aromn 

 

When you set the device for DHCP, and it got a IP, do you see the device listed in the DHCP client list? If not, reboot the router, and then verify it is there. If you go back to the priority list does it still not show it?

 

If not what is the device that is missing?

Recommended Solution
  0  
  0  
#4
Options
5 Reply
Re:QoS Device Priority missing active clients
2020-04-01 20:11:44

@aromn 

 

Does that client have a self assigned static IP address or is it configured for DHCP?

  0  
  0  
#2
Options
Re:QoS Device Priority missing active clients
2020-04-01 22:06:44

@Tony

 

Thanks for the reply.

 

It currently does have a static IP, however I've tried it both using DHCP and setting a static IP and it still does not show up in the QoS device list.

  0  
  0  
#3
Options
Re:QoS Device Priority missing active clients-Solution
2020-04-02 16:15:38 - last edited 2020-04-02 21:29:51

@aromn 

 

When you set the device for DHCP, and it got a IP, do you see the device listed in the DHCP client list? If not, reboot the router, and then verify it is there. If you go back to the priority list does it still not show it?

 

If not what is the device that is missing?

Recommended Solution
  0  
  0  
#4
Options
Re:QoS Device Priority missing active clients
2020-04-02 21:29:36

@Tony 

 

After a hard reboot of the router, the client that was missing is now in the QoS device list. Thanks for the help!

  0  
  0  
#5
Options
Re:QoS Device Priority missing active clients
2020-04-03 15:39:40

@aromn 

 

Very welcome, thanks for the update!

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1554

Replies: 5

Related Articles
Not all active clients are listed in QoS Device priority
1507 0
 Qos Priority not working at all
628 0
 QOS Application Priority
642 0
 Qos Priority not working at all
1386 0
Deco QOS - will lowering QOS bandwidth enable device throttling?
485 0
 Pretty simple QoS question, untagged traffic priority?
1274 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.