Qos Priority not working at all
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Model: AX1800 Wi-Fi 6 Router
Hardware Version: Archer AX21 v4.6
Firmware Version: 1.1.0 Build 20230725 Rel. 55602(5553)
Hi
I have a serious problem with Qos in TP-Link AX1800 Wi-Fi 6 Router. Please help me if possible....
I have implemented Qos setting to set priority for Devices.
As you see in the Screenshot "CC_Prince" is in the "Low Priority" list and "CC_Lovkesh" is in the "High Priority" List.
But its not working Indeed and both the devices can download and upload at the same speed.
Furthermore the QoS priority of the packets are also same (i.e. Best Effort) for both the devices. PCAP file and RouterConfigFile are attached.
Where did I go wrong?
I have also tried speed limiter (See attached screenshot).
The issue is that before or after prioritizing the device, the priority of the RTP packets always remained same i.e. BestEffort(0). However, after prioritizing the device, the another types of traffic (other than RTP) having Background(1), ExcellentEffort(3), Voice(6) priorities.
Kindly help here.
I have captured a PCAP file and analyzed the RTP stream in both Wireshark and OmniPeek. The priority of all the RTP packets is the same (Best Effort) across all devices, regardless of whether QoS has been implemented.
Any assistance regarding this matter would be greatly appreciated.
