Wi-Fi Routers
Hi, I have the above mentioned routers. During setup, the ax55 sees the axe95 as a onemesh add on but not the other way around. I presently have the 95 on the second floor and the 55 on the first. Ult
OneMesh
1Helpful
135Views
My In-Laws have a TP-Link Archer A6 v2.8 in their house that has worked great for several years. It receives internet through the typical modem-via-an-ethernet-cable setup. They now want to add Wi-Fi
EasyMeshOneMeshwired backhaul
0Helpful
136Views
Hello, I have three Archer AX10 v2.0 wifi-routers, and one Archer C6 wifi-router. The three AX10's support EasyMesh. The Archer C6 supports OneMesh. I have two questions: Can I connect all of them usi
Wi-Fi 6EEasyMeshOneMesh
By
Dr2Omalpalli
· Latest post 2024-10-02 06:23:29
by terziyski
0Helpful
129Views
Hi all. I have two archer c6 routers, one v4 and one v3.2. The v4 is connected to my internet, from the supplier router/modem Lan to the v4 wan port, the second v3.2 is connected to the v4 lan port in
OneMeshEasyMeshAccess Point Mode
1Helpful
182Views
Start from AX10000: 1. From GUI internet Speed test, it shows 1G download speed (which is expected) and 24Mbps for upload (which supposed to be same 1G, testing directly with ethernet on main router A
OneMesh
0Helpful
204Views
Last year I found the need to replace the router in my home. I picked up the AX3000 because it appeared in TP Links list of routers that are Onemesh compatible. Since installing the router, my wife ha
Firmware UpdateFeature RequestOneMesh
By
Marauder022
· Latest post 2024-09-04 22:56:50
by Carl
11Helpful
946Views
Running a mesh setup with AXE74 and AX55... what's the best way to measure speed decoration across the network?.. any best practices?. what advice can you share? thank you in advance.
OneMeshAccess Point ModeWi-Fi 6EEasyMesh
0Helpful
187Views
Hi, I stopped into an OfficeMax that was closing today, and I've been wanting to build a mesh network, but I wasn't sure what would work best for me between the Deco W3600 2 pack and an AX1500 router,
EasyMeshOneMesh
1Helpful
314Views
Long story short, the Ethernet port on my AX11000 got fried during a lightning event. I am wondering if there is a way I can essentially use this router as a range extender, instead of it sitting on t
OneMeshAccess Point ModeWDS/Range Extender ModeFeature Request
0Helpful
221Views
Hello, I have an Archer AXE75 and two RE315 extenders. The extenders are connected to the AXE75 via WLAN, the mesh works in principle. I can also see via WifiInfoview that the SSIDs are being propagat
EasyMeshOneMeshRoamingIoT
1Helpful
231Views