Note: I am coming from AX11000 with same MESH devices below and had ZERO problems.  

I just purchased the BE900 coming from TP-Link Archer AX11000 Tri-Band Wi-Fi 6 Router

The first bug when you are viewing when you click on network map MESH shows 0 and Clients show 0 but after you click on it it would show up the MESH devices and same for the clients.

I have 3 MESH devices RE715x and 2-605x with latest firmware on all  The RE715x got setup fine.  The other 2 took about 2 hours to get it to work and finally showing up but no devices connected to them.   I did direct connect to them via RJ45 and it works fine. addtional the 605 always showing online and offine and stop working.  No issues with the RE715x and if I reboot everything the 605x joins about an hour or more later.

after running over night I found its showing 2 more MESH devices but I do not have anymore MESH devices and the IP are from external IP they are both offline but what is going on here?  One shows an IP and the other does not. both are showing offline and I cannot find anything in the logs for the MAC address or IP, they show up on the MESh devices. What is going on here?  I did awhois on the IP one and its from China.

my advice move away from weather on the router or smiley displays devices cute but focus on things like gaming after spending 600 for a router i am not impressed with the interface or options sseems very limited.

Also creat a search funtion for devices or by IP it would be great with large ammount of devices if we had a whois on MAC Address etc little more tools to define what is connected.

My 2.5G devices are always going offline and not connecting .   I was expecting to see great preformance incrase given that this is a 700 USD router. 

B8-DA-EA-F7-B8-DA

110.97.109.101

D0-DA-EA-F7-D0-DA

0.0.0.0