Forums/
Controllers
2022-07-29 07:09:09
EAP225 unable connect, disconnnect after updating OMADA controller OC300 with Latest Firmware 5.3.2
After OC300 update to 5.3.2 the EAP 225 on the network show to be disconnected , when forgotten via configure, the EAP appears as managed by others, after adapting EAP 225 connects for 30 seconds , th
Forums/
Controllers
2022-07-26 01:33:43
EAP225-outdoor showing as disconnected after oc200 updates to 5.3.1
A few weeks ago I tried migrating to the software controller on Linux using 5.3.1 from my oc200 and I ran into this issue where my eap225-outdoor was showing as disconnected. I tried re-adopting it an
Forums/
Controllers
2022-06-29 13:33:38
Unstable EAP225-outdoor after migrating from oc200 to software controller
I have an oc200 running 5.1.7 controller connected to 3 APs; EAP245 v3, a EAP225-outdoor, and a EAP650. All on latest firmware. The EAP245 and EAP650 are connected to a tp-link POE switch and the EAP2
Forums/
WiFi
2022-05-19 01:02:45
New 5.0.5 firmware for EAP245
My OC200 prompted me to upgrade my EAP245 firmware as above. Any information available on what is updated in this firmware release?
Forums/
Controllers
2022-05-17 07:44:15
I can't disable the WMM in QoS after I upgrade to 5.3.1...
Hy Support Team! Why deleted the wmm turn on/off button on EAP config??? I use 2 system in a big hotel: - software controller with 5.3.1 <- :( for workers - OC300 hw controller. This is the biggest sy
Forums/
Controllers
2022-02-20 11:23:08
Manual setting for Internet speed as Speedtest is unreliable.
Hi All, Stil the speedtest is unreliable. I have a 1gb/1gb line where I also REALLY get 940/940. But the speedtest gives me 538/538 max which is incorrect. I asked already since day 1 to correct this