@Alikheri You need to disconnect the EAP from your router when you use a static IP, meaning only connect the computer to your EAP. did you do this? If this does not work, then I think you can...

@Heggie Will waiting for your reply. Take care

@ldrewes Hi, 1. Your ISP needs to provide multiple public static IPs to you. 2. The connection type of your WAN port must be static IP. 3. You can recheck your settings according to this FAQ....

@LLHSO_OMAN The switches are similar, just configure them normally. Note that your uplink port needs to be configured as a trunk port.They have a similiar faq on their website...

@Henry1288 Hi, if all of your devices cannot get the IP from the AP,you need to check your router's internet.make sure the AP is hard-wired to your router.If some specific device cannot get the...

@Alikheri Hello Make sure you are using the original adapter for power supply, and then put it on for a while after powering on, and then press and hold the reset button for 10 seconds to see if...