@Tawkie Check the troubleshooting suggestions here. What can I do if fail to stream the Tapo camera via the RTSP/ONVIF protocol?

@Ko_roria1 Be aware that the Tapo C420 is connected to the H200 hub, not to the router. If the camera signal is weak, shorten the distance between the camera and the hub. Hub's signal will affect...

@Vijay-r LED solid amber indicates the camera has disconnected from the cloud, the wifi is still connected. Usually when a camera is disconnected from the cloud, it cannot be controlled remotely...

@blefe25 Does it create videos as well? What's the hardware and firmware version of your cameras? If this issue is a consistent occurrence -- triggering a detection each time the camera restarts,...

@PowerfulPierre Tapo H200 is set up through Ethernet. If you want it to connect wifi, you can switch hub's network connection after the setup. Tapo D230 doorbell is connected to the hub, not directly...

@Lgracesh When the problem reoccurs, try to remove the main brush, side brush, or the caster wheel, one accessory at a time, and verify if any of these are the reason for this problem. Please record...