1. You configuration is ok. 70dB is good enough. But it would be better to configure the second TL-WA7210N as Client mode instead of bridge with AP mode. Bridge with AP mode will lower down the...

itadmin wrote I have a very similar problem with the WA-7210n in that even using them in AP mode and Bridge with AP Mode the MAC addresses do not get forwarded, and as the network access is by MAC...

Navigate to Network --> Wan settings --> Edit your PPPoE connection --> WAN Service Setup, unchecked " Enable IPV6" and ensure connection mode is Always on.

reboot the Dlink, ensure there is no IP reservations or ARP banding on the Dlink reset the WA801, reconfigure bridge with AP mode. Disable DHCP.

Do you have a modem? I assume you have a modem since you got a username and password for internet. 1) use a Ethernet cable to connect the modem to blue port of the TL-WR720N. 2) use another Ethernet...

it is normal to take sometime to load the tplink login page. Once the internet is working, no need to operate the login page so often. As to the WAN port unplugged, check the cable, I bet.