How can that be possible.:eek:.You probably have inappropriate ARP settings or subnet mask settings. Post up your LAN settings of the C2 and the local network settings of your computer.

@labrok Right answer. @FFK you need to log into the router and go to Wireless 2.4GHz menu to choose the corresponding region. Save and reboot the router. Then your iPad/phone should see the 5GHz...

1. Log into the TD-W8980. 2. Go to Network --> ALG settings to enable all options and save. 3. Go to DHCP Server --> Client list to note down the IP address and MAC address of your Grandstream HT502....

@thaischumi In Test Mode we can choose 40MHz or 20MHz for channelwidth.

You must have configured AP mode by using Quick Setup, right? TL-WA5210G has a issue that some mobile devices cannot connect to the AP if we configure it via Quick Setup. The solution is simple: Log...

CPE510 is indeed a better choice. Yet (just for further discussion:)) I think TL-WA7510N can also be used in similar way shown in @pkgtool's picture. In this picture the two AP is not using passive...