@Rigaro I'm not completely sure, but from what I can see, on the client ER605, you set up an IP Group to cover the required client addresses, then use Policy routing, selecting the IP group, the L2TP...

@youbarajsha A quick search suggests that when configuring bridge mode ( if your ONT is similar to other Syrotech ONTs ) that you need to disable DHCP on the LAN and select which ethernet port you...

@Clive_A Thanks for the reply. Assuming you are using the controller, No, I'm running in standalone mode. I have all of the options checked in the Firewall Attack Defense, apart from Block TCP scan...

The system log, by default, does not seem to record Firewall intrusion attempts such as an incoming connection being dropped. How does one configure the system log to record these events ?

Many USB modems these days operate in HiLink mode, where they are effectively a router and allocate an IP to the connection via DHCP. These wont work with the ER605 , it needs a modem that will...

Ive just tested on my ER605 and enabling Remote Assistance in the Diagnostics menu ONLY allows SSH access from the local LAN. It will ONLY be accessible remotely ( via SSH and HTTP/S ) if you enable...