KJKLV4Offline
Following: 0Followers: 2
Forums/ Switches
2023-06-14 12:20:02
Re:How does the EasySmart Configuration utility find switches on other subnets?
@jra11500 Devices in the same broadcast domain can interface with each other. All that is done at Layer 2 using MAC addresses. Subnets play role at Layer 3 where IP addresses are used. I recommend...
0HELPFULS
Forums/ Switches
2023-06-05 23:47:11
Re:Private VLAN on general trunk port?
@Stryk3rr3al “Is it possible to setup a general trunk port as a promiscuous private Vlan port?” No, it is not. A promiscuous port is basically an access port. What makes it different from a regular...
0HELPFULS
Forums/ WiFi
2023-06-05 02:53:17
Re:Custom DNS
If somebody has a router that is not under Omada Controller, nothing needs to be replicated in Omada. All those gateway settings in Omada Controller are totally useless in such a configuration. If...
0HELPFULS
Forums/ Switches
2023-06-04 21:50:23
Re:Configuration of multiple Switches
@rebru Re. your another issue. Check out the topic TL-SG2008P LACP issue with Synology DS220+.
0HELPFULS
Forums/ Switches
2023-06-04 13:04:16
Re:Configuration of multiple Switches
@rebru Enable STP/RSTP on all switches. Disable the loopback detection entirely. These two technologies should not be used together. Give the SX switches higher priority (lower number) than the SG...
1HELPFULS
Forums/ Switches
2023-06-04 01:07:18
Re:Configuration of multiple Switches
@rebru My knowledge of the SX-3016F is limited, but it looks to me that best you can do is to add a LAG between the two SX-3016Fs and use STP/RSTP in your setup. Unfortunately, one link in your...
1HELPFULS
1242526...