@BreakTheStatic While I don't have a V5, I have a V3, give a try at rebooting it before trying the update in Omada, similar to the note for v5.0.2.

@xmanhattan The IP addresses of a VLAN are applied by the router DHCP. The switch breaks out the VLANs to the specific ports, or combines them for trunking to a router or other switch. For instance...

@PeterBA Yes, it can do truncked .11Q VLANs. You can set a native untagged PVID for the port and multiple tagged VLANs on the same port.

Add to Omada the ability to have a different PVID on the different LAN configured ports of a gateway This is a feature currently available in ER605/ER7206 Routers when managed in standalone mode, but...

Add to Omada control the ability to tag the native VLAN. Add to Omada the option to ignore untagged packets received on a port or unselect native network from the untagged setting. This is a feature...

@AvidLearner So I was curious about this to see if the APs will just bridge on their own with mesh, the short answer, yes they do. So I set up mesh on the controller, set the 5ghz channel on an AP...