How to use local vs WI-FI
I have been told that I can monitor the Tapo locally without being connected to the WI-FI link. Currently, I am connected to the link, but I see no option to use it locally on the app. How is this done exactly? Also, one thing I have noticed is that my Tapo app is connected to one WI-FI (Smart Bro) and my phone is connected to another WI-FI (Globe). I don't know if that makes a difference or not. Thanks.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
If your phone is connected to Wi-Fi(Globe), but the Tapo app shows the camera is connected to Wi-Fi(Smart Bro), you are streaming the camera remotely. You can connect your phone to the Wi-Fi(Smart Bro) and check if you can stream the camera continuously.
If they are connected to the same Wi-Fi already, but you still see the Continue prompt when streaming the camera on your phone:
1. Try to disable cellular data on the phone.
2. Ensure there is no special setting on your host routers, try to turn off AP isolation and lower the firewall level on the host router that blocked the local communication between the camera and your phone.
3. Allow 'Local Network' permission for the Tapo app if you have an iPhone.
4. Reboot the camera for a try.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
If you want to watch the Tapo Camera locally via the Tapo app, your phone(with the Tapo app installed) and the Tapo camera should connect to the same Wi-Fi network. If your phone and the Tapo camera connect to different Wi-Fi networks, you can only watch the camera remotely via the Tapo app.
Your problem description is unclear. Please describe your usage scenario in detail and send me the model number of your Tapo camera, and I'll check if the Tapo camera can meet your requirements.
Best Regards
- Copy Link
- Report Inappropriate Content
@illyriad Hi Solla, I took your advice and put the camera and phone on the same WI-FI. So far I have not gotten that error. My stats on the Tapo is C3320WS EU Ver 2.0 s/n 2235072001944 p/n 1770500084
Thanks so much for your help and have a good day.
- Copy Link
- Report Inappropriate Content
Hi,
If your phone is connected to Wi-Fi(Globe), but the Tapo app shows the camera is connected to Wi-Fi(Smart Bro), you are streaming the camera remotely. You can connect your phone to the Wi-Fi(Smart Bro) and check if you can stream the camera continuously.
If they are connected to the same Wi-Fi already, but you still see the Continue prompt when streaming the camera on your phone:
1. Try to disable cellular data on the phone.
2. Ensure there is no special setting on your host routers, try to turn off AP isolation and lower the firewall level on the host router that blocked the local communication between the camera and your phone.
3. Allow 'Local Network' permission for the Tapo app if you have an iPhone.
4. Reboot the camera for a try.
Best Regards
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@illyriad You are welcome~ :)
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 685
Replies: 5
Voters 0
No one has voted for it yet.