HS100 unable to reset

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

HS100 unable to reset

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
HS100 unable to reset
HS100 unable to reset
2020-07-17 14:25:28 - last edited 2020-08-04 06:53:19
Model: HS100  
Hardware Version: V2
Firmware Version:

I have just upgraded my broadband hub and have successfully reset five of my six DS100 plugs to work with it and all is well.

 

But for one of them I am unable te reset it using the reset button. When plugging it in it goes through  three stages from 1 amber to 2 flashing green then eventually to 3 red. At any of these stages I press the reset button and hold it down but nothing happens until it eventually goes red. 

I have tried on the old hub aswell but still get the same problem.

 

Any suggestions or should I just give up on it and buy a new one?

 

Richard

  0      
  0      
#1
Options
1 Accepted Solution
Re:HS100 unable to reset-Solution
2020-08-04 06:53:00 - last edited 2020-08-04 06:53:19

@FangfossFlyer 

 

As per your description, it seems that the last HS100 never goes to Ready for setup mode, please try to power it off and leave it for several minutes, then power it on and press the settings button for more than 10s again.

 

If the plug cannot be reset successfully, we cannot add it back to the new network on the Kasa app, sorry about that.

 

You may contact the local tech support to check the warranty cause the device seems faulty.
https://www.tp-link.com/en/support/contact-technical-support/#Hotline-Support 

 

Good day. 

Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:HS100 unable to reset-Solution
2020-08-04 06:53:00 - last edited 2020-08-04 06:53:19

@FangfossFlyer 

 

As per your description, it seems that the last HS100 never goes to Ready for setup mode, please try to power it off and leave it for several minutes, then power it on and press the settings button for more than 10s again.

 

If the plug cannot be reset successfully, we cannot add it back to the new network on the Kasa app, sorry about that.

 

You may contact the local tech support to check the warranty cause the device seems faulty.
https://www.tp-link.com/en/support/contact-technical-support/#Hotline-Support 

 

Good day. 

Recommended Solution
  0  
  0  
#2
Options
Re:HS100 unable to reset
2020-08-04 07:58:14

@Brook 

 

Hi,

 

Thanks for the advice and I had already contacted support and they have authorised a replacement as the problem was u able to be solved.

 

Regards,

  0  
  0  
#3
Options
Re:HS100 unable to reset
2020-08-06 01:06:22

@FangfossFlyer 

 

Hi, thanks for the info.

 

Let me know if there is anything we can do for you, good day.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1557

Replies: 3

Related Articles