tplink camera control wont connect from pc with 5.4gz wifi anymore
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I was using just fine the camera with the tplink camera control, i dont know what i've set on the router (cisco technicolor DPC3848VE), and now i cannot use anymore the camera from a pc with 5ghz wifi, i can from wifi 2.4ghz, but is not what im using from this pc, do you know how can i fix it?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
The NC200 only supports 2.4GHz, does not support 5Ghz. That is why it works fine with 2.4GHz.
Good day.
- Copy Link
- Report Inappropriate Content
Hi, thats not correct, because I have been using the camera this way since 2 years ago, me from a 5.ghz wifi connection, and the camera using 2.4ghz, thats the matter i dont know how to solve.
- Copy Link
- Report Inappropriate Content
Hi,
I'm afraid that the " original 5GHz wifi network" should be 2.4GHz; what we can confirm is that the NC200 only supports 2.4Ghz.
You can check the SPECs to get this info.
https://www.tp-link.com/en/products/details/cat-19_NC200.html#specifications
| Wireless Data Rates | IEEE 802.11 b/g/n, Up to 300Mbps |
|---|---|
| Frequency | 2.4-2.4835GHz |
so in order to make it work,it is suggested to connect it to the 2.4GHz.
Good day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1066
Replies: 3
Voters 0
No one has voted for it yet.