Since the last update I have had nothing but problems popping up

- doorbell setting changed itself so chime was now jingle bells on the hub chime

- doorbell duration changed itself to play for over 1 minute continuously

- doorbell volume set to max on the hub chime

- doorbell now passes 'person was detected' notices but will never record, playback is always empty after ensuring all filters were set to on, older recordings are available

- doorbell whines incessently about battery draining too fast, when it's as slow or slower than before and detection events are at 2/5, it rarely triggers on anything that isn't intended to be triggered (people approaching the door) and almost never captures pedestrians walking the pavement at the top of the drive so clearly this is a false alarm.

In particular I would like the battery drain alerts to be able to be turned off, but most importantly playback recordings to be saved to my SD card as settings suggest they will be, since that's 90% of the reason I have a video doorbell.

Can we rollback firmware? I had no issues for months until the update last week.