Tapo P125M power protection too low

Tapo P125M power protection too low

Tapo P125M power protection too low
Tapo P125M power protection too low
2 weeks ago - last edited a week ago
Tags: #Power Protection
Model: Tapo P125M  
Hardware Version: V1
Firmware Version: 1.2.3

Hi,

I got a P125M smart plug, it is rated max 10A 2300W, but if I check power protection it doesn't allow me to set more than 940W.

I have other 16A tapo smart plugs and all of them allow me to set power protection up to 3600W. Why is the limit of P125M such low?

Thanks

  0      
  0      
#1
Options
2 Accepted Solutions
Re:Tapo P125M power protection too low-Solution
2 weeks ago - last edited a week ago

  @tapotiger 

 

The maximum value that can be set for power protection is calculated based on the measured voltage when the smart plug is powered on. If the circuit voltage fluctuates greatly when you insert different smart plugs, the maximum value that can be set for power protection will be greatly different.

 

You can try to unplug and reconnect the smart plug.

Landscape Mode - Tapo App for PadShare Your Pet Story. Win Free Tapo Care!Smart Action 2.0 Explore and meet the next level home automation.
Recommended Solution
  1  
  1  
#2
Options
Re:Tapo P125M power protection too low-Solution
a week ago - last edited a week ago

  @Wayne-TP 

 

Thank you,

 

Unplug and plug again fixed the problem!

Recommended Solution
  1  
  1  
#3
Options
2 Reply
Re:Tapo P125M power protection too low-Solution
2 weeks ago - last edited a week ago

  @tapotiger 

 

The maximum value that can be set for power protection is calculated based on the measured voltage when the smart plug is powered on. If the circuit voltage fluctuates greatly when you insert different smart plugs, the maximum value that can be set for power protection will be greatly different.

 

You can try to unplug and reconnect the smart plug.

Landscape Mode - Tapo App for PadShare Your Pet Story. Win Free Tapo Care!Smart Action 2.0 Explore and meet the next level home automation.
Recommended Solution
  1  
  1  
#2
Options
Re:Tapo P125M power protection too low-Solution
a week ago - last edited a week ago

  @Wayne-TP 

 

Thank you,

 

Unplug and plug again fixed the problem!

Recommended Solution
  1  
  1  
#3
Options