Contact sensor opening time

Contact sensor opening time

Contact sensor opening time
Contact sensor opening time
2024-08-18 14:44:22 - last edited 2024-09-06 11:48:00
Model: Tapo T110  
Hardware Version:
Firmware Version: 1.9.0

Contact sensor is working as expected but if I set the smart action to a custom time (30 minutes) for a door left open alert the notification consistently occurs after one minute (even though there is no smart action for that setting). Suggestions as to what is wrong -fix?

  1      
  1      
#1
Options
1 Accepted Solution
Re:Contact sensor opening time-Solution
2024-08-20 06:53:56 - last edited 2024-09-06 11:48:00

  @peebee 

 

Check whether the device's notification is enabled: Tapo App -> Sensor's Device Settings -> Notification.

Landscape Mode - Tapo App for PadShare Your Pet Story. Win Free Tapo Care!Smart Action 2.0 Explore and meet the next level home automation.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Contact sensor opening time-Solution
2024-08-20 06:53:56 - last edited 2024-09-06 11:48:00

  @peebee 

 

Check whether the device's notification is enabled: Tapo App -> Sensor's Device Settings -> Notification.

Landscape Mode - Tapo App for PadShare Your Pet Story. Win Free Tapo Care!Smart Action 2.0 Explore and meet the next level home automation.
Recommended Solution
  0  
  0  
#2
Options