No admite la contraseña admin despues de restaurar
No puedo agregar una camara NC450 despues de restaurar a valores de fabrica la contraseña admin no la reconoce dice contraseña incorrecta
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi All,
You can refer to the instructions here to troubleshoot the reported issue.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
If you fail to log in to the camera, it may be you have not reset the camera successfully. It's recommended to refer to the instructions in the UG to reset the camera.
Then you can refer to the link below to configure the camera after factory resetting it.
How to set up cloud camera with tpCamera APP?
Best Regards
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi,
After factory resetting the camera successfully, as you can see in step 5) in the below instructions to reconfigure the camera with the tpCamera app, you need to set a new password for secure access to the camera rather than use admin.
How to set up cloud camera with tpCamera APP?
Please follow the above instructions to set up the camera step by step and check if it helps.
Best Regards
- Copy Link
- Report Inappropriate Content
@ingjag tplink nos está agarrando de boludos a todos, parece q nos tiraron una obsolencia programada y cuando todo el mundo pregunta le responden pelotudeces como si no supieramos conectar una cámara, no sean mierdas y digan cómo carajo hacer andar estas bostas q salieron un huevo de plata.
- Copy Link
- Report Inappropriate Content
@PaulBisio89 conseguiste solucionarlo? Me paso lo mismo. Si entro por el navegador a través de la IP que tiene no me deja tampoco pasar del admin/password.
Alguien sabe cómo solucionarlo??? La detecta pero no acepta admin/admin ni ninguna contraseña ni por al app ni por la web/IP.
- Copy Link
- Report Inappropriate Content
@Daniel755 maybe holding on the reset button for a longer time(10-15s) will help factory reset the camera, and then admin/admin will work.
- Copy Link
- Report Inappropriate Content
@Summer_S Hi!! Thanks but i tried It ten times and nothing. Doesn t work with hard reset !!
- Copy Link
- Report Inappropriate Content
@Daniel755 estoy en la misma... dejó de funcionar. Pudiste solucionarlo?, ya intenté muchísimas veces hacer la restauración de fábrica y sin éxito
- Copy Link
- Report Inappropriate Content
@MIQUERIDOWATSON no pude y ya lo dejé. Intenté todo varias veces y es imposible. Obsolescencia o como se quiera llamar. La marca se desentiende del tema. Ya la he tirado.
- Copy Link
- Report Inappropriate Content
Hi All,
You can refer to the instructions here to troubleshoot the reported issue.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1107
Replies: 10
Voters 0
No one has voted for it yet.